Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ista error after camera retrofit
14-01-2024, 17:03 PM,
Post: #1
|
|||
|
|||
Ista error after camera retrofit
Hi at all i ve retrofitted rear view camera On my f44...coding vo to all ecu except dme. What error are this? |
|||
14-01-2024, 21:12 PM,
Post: #2
|
|||
|
|||
RE: Ista error after camera retrofit
calculate test plan
|
|||
14-01-2024, 21:30 PM,
Post: #3
|
|||
|
|||
RE: Ista error after camera retrofit
It sounds like you have not updated VCM, connected cam to wrong pins or something similar...
|
|||
15-01-2024, 06:34 AM,
Post: #4
|
|||
|
|||
RE: Ista error after camera retrofit
(14-01-2024, 21:30 PM)Node Wrote: It sounds like you have not updated VCM, connected cam to wrong pins or something similar... Vcm are updated. If i read vo in salapa element i see 3ag. Camera works well without error. The only difference from the istruction that I connect power supply wire on pin 10 of pdc port instead of pin 9 of terminal 30. But i thing that power supply wire can t generate ehternet error |
|||
15-01-2024, 08:10 AM,
Post: #5
|
|||
|
|||
RE: Ista error after camera retrofit
VCM is NOT FA!!!
|
|||
15-01-2024, 09:03 AM,
Post: #6
|
|||
|
|||
RE: Ista error after camera retrofit
|
|||
15-01-2024, 09:26 AM,
Post: #7
|
|||
|
|||
RE: Ista error after camera retrofit
If it's checked and you did any flashing/coding while it was checked it should be updated. You should see lines in the log that VCM was updated!
|
|||
15-01-2024, 10:25 AM,
Post: #8
|
|||
|
|||
RE: Ista error after camera retrofit
|
|||
15-01-2024, 11:01 AM,
Post: #9
|
|||
|
|||
RE: Ista error after camera retrofit
So You code it or not?
|
|||
15-01-2024, 11:25 AM,
Post: #10
|
|||
|
|||
RE: Ista error after camera retrofit
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content