Unfortunately we do not accept new members for free, Now яёgїsтядтїои cost 30€, if you are interesting Send Email to [email protected]
MEVD17.2.H Cloning
|
15-12-2025, 18:08 PM,
Post: #11
|
|||
|
|||
RE: MEVD17.2.H Cloning
(15-12-2025, 17:49 PM)TheNine90 Wrote:(03-12-2025, 20:19 PM)atomantmk Wrote: Write this eeprom to the donor and try! try this Motorrad f5с retrofit, Motorrad BMS IMMO solutions
MRR 0x149 retrofit, EGS7 recover via J2534 ISN 5ёяvїcё, EGS ISN reset (including EGS7 via OBD) Custom NBTEvo solutions, Physical NBTEvo repairs MGU solutions (including CP/AA activation via SSH) MG1 f5с retrofit by OBD, f5сs rejected by tuning repair Remote coding 5ёяvїcёs +REP and THANKS if I have helped you |
|||
| Reputation: +1 - TheNine90 [+1] | |||
|
16-12-2025, 09:17 AM,
Post: #12
|
|||
|
|||
RE: MEVD17.2.H Cloning
(15-12-2025, 18:08 PM)Cro Wrote:(15-12-2025, 17:49 PM)TheNine90 Wrote:(03-12-2025, 20:19 PM)atomantmk Wrote: Write this eeprom to the donor and try! Same issue. Engine only Cranks. DME2 [12] Digital Motor Electronics 113026 Ignition relay and injectors, supply voltage, fuel injection: Short circuit to ground |
|||
|
16-12-2025, 10:21 AM,
(This post was last modified: 16-12-2025, 10:21 AM by Cro.)
Post: #13
|
|||
|
|||
RE: MEVD17.2.H Cloning
(16-12-2025, 09:17 AM)TheNine90 Wrote:(15-12-2025, 18:08 PM)Cro Wrote:(15-12-2025, 17:49 PM)TheNine90 Wrote:(03-12-2025, 20:19 PM)atomantmk Wrote: Write this eeprom to the donor and try! so its not an ISN issue..... did you check this physically? or you want DTC OFF? Motorrad f5с retrofit, Motorrad BMS IMMO solutions
MRR 0x149 retrofit, EGS7 recover via J2534 ISN 5ёяvїcё, EGS ISN reset (including EGS7 via OBD) Custom NBTEvo solutions, Physical NBTEvo repairs MGU solutions (including CP/AA activation via SSH) MG1 f5с retrofit by OBD, f5сs rejected by tuning repair Remote coding 5ёяvїcёs +REP and THANKS if I have helped you |
|||
|
16-12-2025, 10:41 AM,
Post: #14
|
|||
|
|||
RE: MEVD17.2.H Cloning
(16-12-2025, 09:17 AM)TheNine90 Wrote:(15-12-2025, 18:08 PM)Cro Wrote:(15-12-2025, 17:49 PM)TheNine90 Wrote:(03-12-2025, 20:19 PM)atomantmk Wrote: Write this eeprom to the donor and try! these ecu's can be cloned 1:1 with tools like flex etc even with bench connection, you probably have more issues Don't PM me for SW keys, FRM, Licences, radio codes or similar, you will not get any answer...
|
|||
|
16-12-2025, 18:12 PM,
Post: #15
|
|||
|
|||
|
RE: MEVD17.2.H Cloning
I have tested 2 dme sets, the moment you swap the dme even if cloned doesnt work. Have tested 3 dme all behave the same.
|
|||
|
16-12-2025, 18:15 PM,
Post: #16
|
|||
|
|||
RE: MEVD17.2.H Cloning
(16-12-2025, 18:12 PM)TheNine90 Wrote: I have tested 2 dme sets, the moment you swap the dme even if cloned doesnt work. Have tested 3 dme all behave the same. get better lools then Don't PM me for SW keys, FRM, Licences, radio codes or similar, you will not get any answer...
|
|||
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| bmw mini aisin d70f4019 cloning | tintoverano | 3 | 280 |
30-07-2026, 14:03 PM Last Post: tintoverano |
|
| BMW MEVD17.2.5 need component name and value URGENT | sixcode | 11 | 2,103 |
26-05-2026, 20:18 PM Last Post: ttkkas01 |
|
| Mini Working Hours Reset Request - MEVD17.2.3 | badenaleks | 1 | 178 |
27-04-2026, 10:24 AM Last Post: atomantmk |
|
| cas4 cloning what is the best way ?? | century-voyager | 6 | 342 |
27-02-2026, 02:12 AM Last Post: HU_man |
|
|
|
MINI R56 N18 (MEVD17.2.2) – Fuel trims climbing at idle | user0086 | 0 | 145 |
21-02-2026, 16:27 PM Last Post: user0086 |
| WH reset MEVD17.2.3 | jaramillo | 2 | 250 |
28-01-2026, 18:10 PM Last Post: jaramillo |
|
| Mevd17.2.3 Working Hours Reset | kops | 4 | 442 |
31-12-2025, 09:08 AM Last Post: wiese |
|
| Solved ✔ MEVD17.2.3 DTC | tonemoz | 6 | 321 |
09-09-2025, 10:52 AM Last Post: tonemoz |
|
| reset working hours MEVD17.2.9 | sattvv | 1 | 250 |
04-09-2025, 07:42 AM Last Post: petkowo |
|
| MEVD17.2.3 DTC off | tonemoz | 7 | 511 |
15-06-2025, 07:56 AM Last Post: tonemoz |
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content



![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
