[TomoR]

Can somebody tell me what is differences on E series CIC and MASK2 Faceplate?
Becouse I have 3 faceplate(E60,E70,E90) but on E60 CIC work only mute and cd out buttons!! With original CIC faceplate all works like should..

When I put side by side this and realy CIC frontplate this look identical!!

[Stivikivi]

Can somebody tell me what is differences on E series CIC and MASK2 Faceplate?
Becouse I have 3 faceplate(E60,E70,E90) but on E60 CIC work only mute and cd out buttons!! With original CIC faceplate all works like should..

When I put side by side this and realy CIC frontplate this look identical!!

Your Faceplate is faulty then. Normally it doens't matter if from Mask 2, or CIC.

[TomoR]

Can somebody tell me what is differences on E series CIC and MASK2 Faceplate?
Becouse I have 3 faceplate(E60,E70,E90) but on E60 CIC work only mute and cd out buttons!! With original CIC faceplate all works like should..

When I put side by side this and realy CIC frontplate this look identical!!

Your Faceplate is faulty then. Normally it doens't matter if from Mask 2, or CIC.

This from E60 and E70 MASK2 is 100% OK becouse I have see before radio is moved from Car.All has working like schould!!
Then I have connect to my E60 NBT retrofit adapter and then is situation like I have told! Have communicated with NeoAnderson and told me that this is from MASK and not CIC faceplate!

[jararak]

Check coding of year

i had car with mask1, setup 2008 year due 6fl mulf2 high retrofit, faceplate start doing bullshit, when I change it to 2007/3, everyting works, like it should
for example mask2 behave like mask1 when you chose old date for it, it can work with mask1 faceplate (this is how bmw exchange those units), so this is reason why lot of people thinks, map output can be coded to mask1, but they have in fact mask2 with mask1 faceplate.
probably you have to try some different time coding for it.

[TomoR]

Check coding of year

i had car with mask1, setup 2008 year due 6fl mulf2 high retrofit, faceplate start doing bullshit, when I change it to 2007/3, everyting works, like it should
for example mask2 behave like mask1 when you chose old date for it, it can work with mask1 faceplate (this is how bmw exchange those units), so this is reason why lot of people thinks, map output can be coded to mask1, but they have in fact mask2 with mask1 faceplate.
probably you have to try some different time coding for it.

I have try all 3 faceplate connect to cic and default code cic with 09/09 but this not help....

[zeronoo]

For e series cic professional there are 2 faceplate versions: one up to 03.2010 and one from 03.2010

[TomoR]

But part number is the same!