Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Help with Ista/icom error
10-04-2018, 07:34 AM,
Post: #11
RE: Help with Ista/icom error
(07-04-2018, 23:22 PM)brunofraga Wrote:  I had a friend helping me on TV and we both saw the icom had Static IP set inside the firmware panel we tried to change to DCHP but it didn't change.

If you tried to change IP to DCHP using 169.xxx.xx.xx :60080 and it does not work you must try 169.xxx.xx.xx 58000/?countrycode=de
Quote this message in a reply
10-04-2018, 09:50 AM, (This post was last modified: 10-04-2018, 17:39 PM by duxi.)
Post: #12
RE: Help with Ista/icom error
You can also configure your icom to use DHCP and connect it to your access point via LAN/WLAN. Configure access point to reserve static adress for your icom. Make sure that LAN is configured with same subnet as your icom.
Sometimes there is problem to change to DHCP, use 169.xxx.xx.xxx with 255.255.0.0 and reboot device.
   
Quote this message in a reply
12-04-2018, 00:20 AM,
Post: #13
RE: Help with Ista/icom error
Guys, we have tried different ways to change to DHCP but still the same, the resolution will be order replacements.. biggrin Thank You
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,797 710,435 2 hours ago
Last Post: Sedoy
XZBMW ISTA Czech Database ( 4.43.XX - 4.47.XX) inspi1981 68 8,546 11-06-2024, 12:51 PM
Last Post: inspi1981
XZBMW ISTA+ 4.47.4x Install Files - MEGA shawnsheridan 5 1,214 10-06-2024, 14:18 PM
Last Post: CATAHA
  F8x NBT Refrofit Flash Failed; Fatal Error Help mitch32 5 190 10-06-2024, 09:47 AM
Last Post: painsage
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 133 17,083 10-06-2024, 06:14 AM
Last Post: NeRkO20
XZBMW ISTA 4.47.4x I-LEVEL+OVERVIEW AutoExe3219 0 178 10-06-2024, 00:53 AM
Last Post: AutoExe3219
XZBMW ISTA+ 4.47.3x Install Files - MEGA shawnsheridan 15 2,400 07-06-2024, 12:56 PM
Last Post: MasterGt
  [RESTARTED] icom next clone repair (only single pcb) ____ANGEL___ 52 5,563 07-06-2024, 00:46 AM
Last Post: faraz
  [MEGA] ESYS + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 115 38,761 06-06-2024, 16:31 PM
Last Post: hashtagmaster
  Entrynav2 Retrofit Ethernet Error moreply 1 156 06-06-2024, 11:35 AM
Last Post: moreply

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content