Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Are these correct values for n63 engine?
27-07-2018, 09:45 AM,
(This post was last modified: 27-07-2018, 09:45 AM by bmwlover.)
Post: #11
|
|||
|
|||
RE: Are these correct values for n63 engine?
Driver? How you connect driver and misfire? Was using most expensive gasoline. Maximum what was recommended for the car.
|
|||
27-07-2018, 10:33 AM,
(This post was last modified: 27-07-2018, 10:33 AM by Node.)
Post: #12
|
|||
|
|||
RE: Are these correct values for n63 engine?
Your numbers seem to be perfectly normal. Firing is chemical process so it can and sometimes will go wrong. And more frequently under heave acceleration. Thats why I joked about replacing driver
|
|||
27-07-2018, 10:44 AM,
Post: #13
|
|||
|
|||
RE: Are these correct values for n63 engine?
Ok now understand. I have other car too 4 cylinder. It has 100000km and maximum misfire number is 124. Because of that I thought that this n63 engine had problems.
|
|||
27-07-2018, 14:34 PM,
(This post was last modified: 27-07-2018, 14:35 PM by M-Simon.)
Post: #14
|
|||
|
|||
RE: Are these correct values for n63 engine?
Hi,
I had the same topic: https://cartechnology.co.uk/showthread.p...re+counter The counter is very sensitive. Newer N63 compensate vibrations e.g. from bad roads by software. The old N63 DME counts also vibrations as misfire. https://www.newtis.info/tisv2/a/en/f13-6...n/F7NGw5sB and https://www.newtis.info/tisv2/a/en/f13-6...1VnYkoag1i |
|||
27-07-2018, 16:28 PM,
(This post was last modified: 27-07-2018, 16:37 PM by bmwlover.)
Post: #15
|
|||
|
|||
RE: Are these correct values for n63 engine?
(27-07-2018, 14:34 PM)Munich Simon Wrote: Hi,Hello. Thank you for the answer. Can I reset that values? How many misfires do you have in last 10000km? What do you mean in temperature sensors? O2 sensors? |
|||
28-07-2018, 06:44 AM,
(This post was last modified: 28-07-2018, 06:44 AM by M-Simon.)
Post: #16
|
|||
|
|||
RE: Are these correct values for n63 engine?
Hi,
I don’t care about this counter, because you can not trust the values. BMW tells me the same. The sensors have the Part #13627585492. The Counter can be reseted by deleting the Adaptions from the DME. Again, if your engine is running normal without any problems forget the counters. |
|||
10-08-2018, 11:28 AM,
(This post was last modified: 10-08-2018, 11:31 AM by bmwlover.)
Post: #17
|
|||
|
|||
RE: Are these correct values for n63 engine?
Ok thank you but how to check if everything is ok?
New values after 5000km on the left picture. Old values on the right picture. |
|||
06-09-2018, 09:36 AM,
Post: #18
|
|||
|
|||
RE: Are these correct values for n63 engine?
Unsolved. Please share experience.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content