Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW 6wa cluster on bench / ZGW2
10-06-2019, 07:58 AM,
(This post was last modified: 10-06-2019, 08:00 AM by ElBarto.)
Post: #1
|
|||
|
|||
BMW 6wa cluster on bench / ZGW2
Hi. I setup hu nbt with my zgw2 on bench. ZGW2 and HU NBT work right and show up on esys when read ECUs.
Now I connect f20 cluster with most to nbt and CAN to zgw2. But cluster (KOMBI) dont show up in esys ECU list. I use arduino Ignition KL15 Emulator. Cluster is switching on through ZGW and work right but how I wrote dont show up in ESYS ECU List for coding etc. ZGW2 is from F10 5-Series but Cluster from F20 2-Series. But I think thats not the problem. Anything I missed ? |
|||
10-06-2019, 08:36 AM,
Post: #2
|
|||
|
|||
RE: BMW 6wa cluster on bench / ZGW2
Did you wire pt-can to the cluster?
|
|||
12-06-2019, 22:34 PM,
Post: #3
|
|||
|
|||
RE: BMW 6wa cluster on bench / ZGW2
Hi. Yes PT-CAN I already wired to ZGW.
Solution was to switch the two fibre cabes of MOST Cable. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content