Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Edc16p34 touareg control circuit for Throttle
14-08-2014, 06:00 AM,
Post: #1
|
|||
|
|||
Edc16p34 touareg control circuit for Throttle
Hi friends, sorry for my english. we have touareg v6 BKS with fault p3243 Control Circuit for Throttle Body Module: Electrical Malfunction. Throttle was replaced with a new one..but problem is present...engine starts for a second and off...throttle always closed when ignition is on..in schematic diagram all wires is coming to ecu...so we check wires from ecu to throttle with help of lamp 45w. 1st pin 10.8v ->5th pin 11.3v (our construction has some losses so 5th pin is ideal) is this value normal for first wire?
odis(or vas) has check...In second wire of throttle(25 ecu pin) with ignition on we should have 6 or more volts.. we have it without throttle...but with throttle we have about 0.3 v...So if wires are okay and throttle is okay to (we also check with old one, but 100% works from another touareg), problem in connector or ecu...connectors are fine..so need to open ecu.. when i opened ecu i fined 25pin=> resistor(assembly) 22k => 8pin of bosh 30427...more connections i have no find for 25 pin...so how under load we should have 6 or more volts in circuit with 22k resistor... help me please i am just beginner... |
|||
15-08-2014, 03:36 AM,
Post: #2
|
|||
|
|||
RE: Edc16p34 touareg control circuit for Throttle
I have just reball cpu and all okay...thats all...may be it was overheat.
Thanks)))) |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content