[tutuianu_daniel]

I'm trying to flash a F10 CIC on bench with E-sys and I receive the following error.

Does anyone knows what is the reason ? Thank you

Code:

[HU_CIC - 63 - swfl_000003a6-008_038_008] Transaction type: swDeploy;  Message: 11% progress on ECUId:HU_CIC_0x63 [42% of swfl_000003a6-008_038_008] [TRANSACTION]
[HU_CIC - 63 - swfl_000003a6-008_038_008] Transaction type: swDeploy;  Message: 11% progress on ECUId:HU_CIC_0x63 [42% of swfl_000003a6-008_038_008] [TRANSACTION]
[HU_CIC - 63 - swfl_000003a6-008_038_008] Transaction type: swDeploy;  Message: 11% progress on ECUId:HU_CIC_0x63 [42% of swfl_000003a6-008_038_008] [TRANSACTION]
MCDDiagService<id=28649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUFlash, service=RD - RequestDownload, description=error: negative response : requestOutOfRange, link=HU_CIC_63_ETHERNET> [DIAGSERVICE]
[HU_CIC - 63 - swfl_000003a6-008_038_008] Transaction type: swDeploy;  Message: 11% progress on ECUId:HU_CIC_0x63 [42% of swfl_000003a6-008_038_008] [TRANSACTION]
[] job failed with negative response error:
code: repeat job
description: Service RD returned a negative response with response code requestOutOfRange; LinkName: HU_CIC_63_ETHERNET
severity: ERROR
[THROWABLE]
[HU_CIC - 63 - swfl_000003a6-008_038_008] Transaction type: swDeploy;  Message: TA finished [TRANSACTION]
[HU_CIC - 63] There was an error during TAL execution, please check the log files. [WARN]
[HU_CIC - 63] - [Exception - HU_CIC - 63] job failed with negative response error:
code: repeat job
description: Service RD returned a negative response with response code requestOutOfRange; LinkName: HU_CIC_63_ETHERNET
severity: ERROR

[HU_CIC - 63] finalizeECUFlash started [PROGRESS]
[HU_CIC - 63] finalizeECUFlash finished [PROGRESS]

[oceandiver86]

did you check that there are no CD's in the drive and no accessories connected?

[tutuianu_daniel]

did you check that there are no CD's in the drive and no accessories connected?

yes

[smilo]

Ping with -t your ZGW and HU when flash process. Follow ping replies in real time. I think the Ethernet link is not stable in your bench

[tutuianu_daniel]

I fixed it by using an older E-sys 3.27.1 and older Psdzdata 3.57.4