[junnnior]

Hi
i have peugeot boxer 2.2 hdi
visteon dcu 102
on the table k-tag read no problem when connected to a car
ecu fails to communicate, the "check engine" light only blinks once
some solution
thanks

[autoscan7]

Hi
i have peugeot boxer 2.2 hdi
visteon dcu 102
on the table k-tag read no problem when connected to a car
ecu fails to communicate, the "check engine" light only blinks once
some solution
thanks

may be cheksum! try with winols

[xander20005]

Check the wires on car. remove exterior fusebox and between sockets under box and ecu socket

[junnnior]

Hi
checksum ok I counted
fuses or not because I was putting into another car and the same

[fodortms]

Hi
Try to pressing the borad and after add on ignition
I repaired more ecu with same trouble.
It was soldering problem with all.
But you be very carefull, when remove the board from cover.
Br