[Levanime]

Gini can read FSC thru K-DCan? did not know that
i thought it could do E series with ICom only and F series ICom/Enet

[patrutalex]

1. Get a ENET cable . These typically end up costing about $5 by the time you pay for shipping and everything, but you can certainly save some money by making your own. Search eBay for "bmw enet", see this example for pre-made cables, or make your own with these instructions.
2. Set your PC/Android/Mac ethernet port to IP: 169.254.199.98, subnet: 255.255.255.0, Gateway: 169.254.199.99, any DNS
3. Connect the cable and turn on the car (acc mode is fine)
4. In your web browser go to: ftp://169.254.199.99
5. It should prompt for a login, user name is "root", password is either "Hm83stN)" or "cic0803"
6. Click the link to go up a directory a couple of times then browse to /HBpersistence/normal and download the file "generalPersistencyData_DiagnosticSWTControlle r"
7. Disconnect from the car and get that file into Windows
8. Open the file in a hex editor like Hxd http://mh-nexus.de/downloads/HxDSetupEN.zip
9. Press CTRL-F to search, change the search mode to "Hex" and then search for "01 01 00 1B”. Note that the data just before this should read "3F 01 00 00", otherwise see 9a below.
10. Highlight and delete everything prior to "01 01 00 1B”
11. Go to line (offset) 130 and delete the last block and everything after. The data to be deleted should begin with "3F 01", otherwise see 11a below.
12. Save the file as "a.hex", which should be exactly 319 bytes
test e60,e90 good work

[emhtuning]

Give me the vin , i will get you the code

Edit : i didn't read the vin in your first post .

For which map do u need the code for ?

[Znuff]

E60 made after 03/2009, the ones that come with CIC instead of CCC CAN NOT read file trough DCAN cable.

Basically - you need to consider them like they are F-Models (when it comes to CIC), instead of E-models.

You either read it with I-COM, if you have one, or you do it with E-NET cable - follow the exact steps that PatruAlex said.