Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F01 flexray initilization failed
15-09-2018, 05:57 AM,
Post: #1
|
|||
|
|||
F01 flexray initilization failed
Hi guys. Few months ago i retrofited combox to friend's f01 9/2010 but still with mulf/tcu, just replaced tcu with combox, to save time, don't alive ecall unit, just media. Last week he replace his rear EDC struts and now problem begins. He was not able to code it with istaP because ecall not funcional. Ok, so I try to inject CAFD file to struts, but without luck, try first to upgrade firmware via esys - vdm and 4 struts. VDM successfull, but for now I have issue with 4 struts - link error, also cafd missing. i had idea to sync flexray, since then, issue started. I lost all device which is sitting on flexray, don't see it online. Try to upgrade zgw, dsc, szl. but without major luck. curently car don't have SWW, HSR, SWW, VDM (+4 struts), AL. I read, there must be at least 2 units working to have synchronous flexray, last one is ICM, but not sure how it is called in Esys (for example VDM=icm_v). Unfortunately i don't see those unitx also in esys. istaD showing just there is no communication with units, i try to check power, but it works like a charm, so issue is with zgw and synchronizaiton. before my entreee everything works
Old ilevel is 13/7/506, new one 18/7/545 |
|||
15-09-2018, 09:33 AM,
Post: #2
|
|||
|
|||
RE: F01 flexray initilization failed
Did you try 'steuren flexyray reset ' by tool32
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content