[Lmqcatarino]

I'm a locksmith guy, but this is from my car.

The airbag clockspring broke and I had to buy it from online store, because VAG don't have stock.
Part number is the same: 5K0953569AL
Airbag error is gone, horn works now and steering buttons, but still have some error and cruise control don't work.
DTC:
Steering column
U112100 - databus missing message
B114411 - Turn Signal Switch
B114913 - Windshield Wiper/Washer Switch
Engine control module
P164700 - Check Coding of ECUs on Powertrain Data Bus
P056800 - Cruise Control Switch

After some Google about this DTC I get it should be a coding issue from the clockspring I exchange.
The only solution is to mount back the old module and read the coding or I can get that coding somewhere?
Thanks

[Gietek1]

"The only solution is to mount back the old module and read the coding or I can get that coding somewhere?
Thanks"

Yes that is solution , or change only clockspring without module.

[Lmqcatarino]

"The only solution is to mount back the old module and read the coding or I can get that coding somewhere?
Thanks"

Yes that is solution , or change only clockspring without module.

OK. I will do it. 
But, for example, ABS coding is possible to get just by vin / label right?

---

"The only solution is to mount back the old module and read the coding or I can get that coding somewhere?
Thanks"

Yes that is solution , or change only clockspring without module.

OK. I will do it. 
But, for example, ABS coding is possible to get just by vin / label right?