[wiese]

I have a 2010 Q5 and want to clone the BCM2. 
I used vvdi multi-prog to clone it and read the D-flash and P-flash, 
but the D-flash was FF. I was told it has an external EEPROM, 
so I removed the original BCM2's 95320 to read it. 
Foolishly, I broke pins 4 and 8 while removing the 95320!
Damn, now the 95320 won't read it. Is there any other way?

BCM2 D70F3381M2 (A1)
The original BCM2 is an 8K0 907 064 DS (0326 H02)
The used BCM2 is an 8K0 907 064 DS (0327 H02)
VIN: WAUZZZ8R2AA056535

Thanks in advance for your help.
I'm willing to pay for my stupidity.

Q5.rar
File Type:
Downloaded:	8 times
Size:	317.62 KB

[JorBo]

Try to scrap the legs into the eeprom and solder wires for read in circuit. Without eeprom, difficult to adapt, you need to collect immo data from ecu,tcu,elv and new keys or reused the originals.

[shasse]

hi
this bcm with external eeprom 

Try soldering the pins and reading the EEPROM.
If not, a big mess awaits you.