[xtek]

Hello,
I hope and wish anyone can help me on this matter.

We have a Seat Leon 2008, which we've replaced the Airbag control unit because it have stored a fault code:

---------------------

Address 15: Airbags Labels: 5N0-959-655.lbl
Part No SW: 5N0 959 655 A HW: 5N0 959 655 A
Component: J234__A01 VW10 HI 1815
Revision: 19013000 Serial number: 0039DP6ED1QO
Coding: 0012337
Shop #: WSC 06402 785 00200
VCID: 3B7E38C57A2630C68E5-806E

Subsystem 1 - Serial number: 6333FTS630380888

Subsystem 2 - Serial number: 6343FTS646120888

Subsystem 3 - Serial number: 6353ETS6DN12TVNH

Subsystem 4 - Serial number: 6363ETS64L02TVNH

Subsystem 5 - Serial number: 00000000000000000

Subsystem 6 - Serial number: 00000000000000000

1 Fault Found:
00003 - Control Module
014 - Defective - MIL ON
Freeze Frame:
Fault Status: 11101110
Fault Priority: 2
Fault Frequency: 254
Reset counter: 110
Mileage: 127760 km
Time Indication: 0
Date: 2000.00.00

------------------------

We ordered the replacement at the delaer, they supplied 5N0959655AA/00D
Of course we used several times the code 00D/0D to try to code the unit, using the workshopcode 12345 or the stored on the older unit. Also after this, we tried a lot of codes 09,07 and a lot of them, and all of them are rejected.

Can you help us or do you know why the unit can't be coded?

Address 15: Airbags Labels: 5N0-959-655.lbl
Part No SW: 5N0 959 655 AA HW: 5N0 959 655 AA
Component: J234__ VW10 HI 2518
Revision: 27019000 Serial number: 003L7P4CLA8P
Coding: 0000000
Shop #: WSC 00000 000 00000
VCID: 7CFCFBD93FA8F7DADF-8029

Subsystem 1 - Serial number: 6332MTS630380888

Subsystem 2 - Serial number: 6342MTS646120888

Subsystem 3 - Serial number: 6351HTS6DN12TVNH

Subsystem 4 - Serial number: 6361HTS64L02TVNH

Subsystem 5 - Serial number: 00000000000000000

Subsystem 6 - Serial number: 00000000000000000

1 Fault Found:
01042 - Control Module; Not Coded
000 - -

Thanks in advance

[Sky walker]

Hi

Have you sent a log to Ross tech?

The index/ colour code doesn't appear in the new scan

Regards

[xtek]

Hi

Have you sent a log to Ross tech?

The index/ colour code doesn't appear in the new scan

Regards

Yes I did, but still no answer from they,
About the index colour I suppose not will appear until is not coded, of course the unit comes with the label with the index code attached. But all codes are rejected,

All codes are tried are from this table but this codes are for 1J0/6N0 units and until 2006...

[seba100377]

Read memory 95640 and send it here

[xtek]

Read memory 95640 and send it here

How can I do that?
thank you!

[Sky walker]

00 index for 5n0 959 655 family uses 0012336

[seba100377]

You need to remove airbag sensor from the car to open it and read the memory 95640 with the programmer; carprog,mprog ,etc.

[xtek]

00 index for 5n0 959 655 family uses 0012336

Thanks, will try but this one is 0D index