Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Need Help with Vagcom China 16.8.4
04-03-2017, 16:05 PM,
Post: #1
|
|||
|
|||
Need Help with Vagcom China 16.8.4
I have purchased this vagcom 16.8.4 cable from china the cable is not connecting all the times to laptop usb, and when it connects i manage to open the software after couple of try it won't open from the first time, managed to register the cable but when i try to scan the car after first or second module scan the software get stuck and don't respond the only way to bypass this is to unplug the cable from usb and to close the software, and then i need to start the process again from step one.
My question to you guys is:1. Can i resoft this cable and if yes can any of you guys be good enough to point me in the wright direction or to tell me all the steps how to do it. 2. Is it possible to make this cable to work with original software? Thank you in advance for any help. Attached down are my cable details. Thanks again. |
|||
04-03-2017, 17:32 PM,
Post: #2
|
|||
|
|||
RE: Need Help with Vagcom China 16.8.4
(04-03-2017, 16:05 PM)clau23 Wrote: I have purchased this vagcom 16.8.4 cable from china the cable is not connecting all the times to laptop usb, and when it connects i manage to open the software after couple of try it won't open from the first time, managed to register the cable but when i try to scan the car after first or second module scan the software get stuck and don't respond the only way to bypass this is to unplug the cable from usb and to close the software, and then i need to start the process again from step one.Try it. |