[GeorGiii]

Hallo guys,

i have a problem i cant use FSC for my CIC (e60 535D) !
it was working 2 Years without problem but i wanted to update to 2017-2 and the FSC was called always wrong.
I flashed the CIC new and tryed to import mod fsc für aktivate CIC Unit
but 1B FSC Code is rejected.

Than a Fried told me i have to remove the FSC with D-link E-100
and than again try to import mod fsc / or with patch intel123 fsc



Does someone has a instruction for remove FSC from CIC with D-Link E-100 ?

best regards


GeorGiii

[flo_007]

U can use http://cartechnology.co.uk/showthread.php?tid=23690 for remove the fsc

[emhtuning]

Not a friendly method to use Dlink E100 , but here is a quick one .

CIC has several pre-Configured IP address's so it can communicate internally with other modules on the Most network , in order to FTP the CIC you need to manually set the PC IP address with it's netmask to match the CIC IP range .

attached are the CIC IP address's , simply set your PC IP address with 1 extra IP number , for example if CIC IP is 192.168.11.2 then your PC should be 192.168.11.3.

the only way to find out if the IP setting is correct and the CIC is accessible is to Ping the CIC IP , you get an answer then great but if not then you try another IP of the CIC and offcourse you need to change the PC IP too to match the same network range .

after ensuring the network setup is accurate between CIC and PC then you will need to run some FTP software , I use WINSCP but there are tons of other tools .

you need to have the login info of the CIC FTP , then you need to know which files to delete to virgin the CIC .

PS: there are many other ways to delete all the FSC's and Virgin the CIC which are way easier than the old school method of FTP , but you asked and here is the answer.

[GeorGiii]

Thanks for answers it works now

to remove inside ID2 ID3 and swtcontroller and Reset CIC
than the FSC was removed

A friend was showing me the way which help me

Best Regards

GeorGiii