[Dee67]

Hello all,
Just purchased this 2017 F20 with Entrynav2 head unit, on I drive icons the Nav is stuck on loading. When Nav is selected, it comes up with 'to use navigation, connect USB device with navigation map'
Can anybody help with this?, I do have Esys and Ista.
Thanks

[Billyjoe69]

Start by doing what the system tells you: connect a USB drive with the maps. Try to initiate a rewrite of the navigation. You will see if you are blocked by the FSC.

If that is the case, it will require a different procedure.

[Dee67]

Thanks,
Which version should I download? It was not me who may have tried before..

Start by doing what the system tells you: connect a USB drive with the maps. Try to initiate a rewrite of the navigation. You will see if you are blocked by the FSC.

If that is the case, it will require a different procedure.

[kimz]

Here you go, use WAY maps for your EntryNav2 HU. Upload is not mine, I'll just share it

------------------------------

Also post the error list from HU and the log from E-Sys -> Comfort mode -> Check FSC Status, address 0x63. I am afraid that your unit may have been replaced or retrofitted and not coded to car

[Dee67]

thank you, i'll try it 

Here you go, use WAY maps for your EntryNav2 HU. Upload is not mine, I'll just share it

------------------------------

Also post the error list from HU and the log from E-Sys -> Comfort mode -> Check FSC Status, address 0x63. I am afraid that your unit may have been replaced or retrofitted and not coded to car

[Dee67]

I have it working, fellow member helped remotely.
Thanks to all who replied 

thank you, i'll try it 

Here you go, use WAY maps for your EntryNav2 HU. Upload is not mine, I'll just share it

------------------------------

Also post the error list from HU and the log from E-Sys -> Comfort mode -> Check FSC Status, address 0x63. I am afraid that your unit may have been replaced or retrofitted and not coded to car