Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F23 Pedestrian protection system coded out - now airbag error
08-04-2019, 13:01 PM,
Post: #1
|
|||
|
|||
F23 Pedestrian protection system coded out - now airbag error
Hi guys,
Using Esys VO coded the ACSM to remove (8TF) pedestrian protection system on a friend's BMW F23 2016. Unfortunately I now have: 930A30 AIRBAG FRONT SENSOR, RIGHT: CODING DATA DO NOT MATCH EQUIPMENT on ACSM module. I tried deleting the fault code through ISTA-D but it does not clear. I have not disconnected any of the Pedestrian protection (PPS) sensors as I don't know where they are, but not getting any error codes related to PPS. Is it related to the PPS sensors still being connected or something else...any ideas what I can do to fix? Many thanks, |
|||
08-04-2019, 13:05 PM,
Post: #2
|
|||
|
|||
RE: F23 Pedestrian protection system coded out - now airbag error
you have to disconect all 2 or 3 conectors and than code out
|
|||
08-04-2019, 13:26 PM,
Post: #3
|
|||
|
|||
RE: F23 Pedestrian protection system coded out - now airbag error
Answer is in the fault text really...
Disconnect the remaining sensor.. |
|||
08-04-2019, 13:50 PM,
Post: #4
|
|||
|
|||
RE: F23 Pedestrian protection system coded out - now airbag error
|
|||
08-04-2019, 13:52 PM,
Post: #5
|
|||
|
|||
RE: F23 Pedestrian protection system coded out - now airbag error
System is part of the airbag so...
Disconnect the sensors and report back. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content