[Arg0N]

Helllo guys,

I'm kinda new at BMW coding and have encountered an error in ncs expert. Tryed googling it, but no direct and correct answers there. All other modules works, codes and writes fine. Except LMA. Got screenshots of errors. Would love an indepth step by step fix from you, because I'm new. Thank you

[LBDT]

try those files in
C:\EDIABAS\ECU\LM_60.prg
C:\NCSEXPER\DATEN\E60\LM_E60.C0B

backup your files first, it may do nothing, but you never know

[Arg0N]

Thank you for your detail walktrough and files. Will try it tommorrow and let you know if it works. Looking suggestions from other people.

[Arg0N]

Everything is the same mate...

[bmwbmw]

You have eeprom corrupted,try to flash first and then encode LMA,is still not works not loose time,exchange LMA with another used one encode it and go ahead....i'am have this situation many times....

[Arg0N]

What do you mean try to flash it? I'm kinda new in ncs..

[Alex_Tushino]

Helllo guys,

I'm kinda new at BMW coding and have encountered an error in ncs expert. Tryed googling it, but no direct and correct answers there. All other modules works, codes and writes fine. Except LMA. Got screenshots of errors. Would love an indepth step by step fix from you, because I'm new. Thank you

change the release date to encode.the unit is not suitable for your machine,but can be coded

[Arg0N]

Got plans to upgrade to LM2. So I think it will be all good with it

[koder88]

I have a this problem , I must replace lm

[Arg0N]

Swapped to LM2 and everything works perfectly