Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Coding used NBT-HU
30-09-2019, 22:38 PM,
(This post was last modified: 30-09-2019, 23:07 PM by Apansson.)
Post: #21
|
|||
|
|||
RE: Coding used NBT-HU
I got a return when running the job mentioned in the guide. I dont have it now, but it didnt say error.
Do i have to reboot or something after running the job? |
|||
01-10-2019, 13:03 PM,
Post: #22
|
|||
|
|||
RE: Coding used NBT-HU
|
|||
01-10-2019, 15:10 PM,
Post: #23
|
|||
|
|||
RE: Coding used NBT-HU
This is the output of tool32:
apiJob("NBT","_steuern_delete_persistency_intel_plus_swt","swt","") Satz : 0 OBJECT = nbt SAETZE = 1 JOBNAME = _steuern_delete_persistency_intel_plus_swt VARIANTE = NBT JOBSTATUS = UBATTCURRENT = -1 UBATTHISTORY = -1 IGNITIONCURRENT = -1 IGNITIONHISTORY = -1 Satz : 1 JOB_STATUS = OKAY _REQUEST = 4 Bytes 0000 : 31 01 FD E4 1.ýä _RESPONSE = 4 Bytes 0000 : 71 01 FD E4 q.ýä If i run CPS-lesen i get the wrong VIN. I changed the VIN using Esys. ISTA is not returning any error after changing VIN using esys. |
|||
01-10-2019, 15:27 PM,
Post: #24
|
|||
|
|||
RE: Coding used NBT-HU
(01-10-2019, 15:10 PM)Apansson Wrote: This is the output of tool32: Delete FSC ( i use SWT in argument box, not sure if it makes any difference), then reboot. You need to have the right VIN to import the repair FSC's. Use "writedatbyidentifiervin", under FSC extended. |
|||
01-10-2019, 15:31 PM,
(This post was last modified: 01-10-2019, 15:33 PM by Apansson.)
Post: #25
|
|||
|
|||
RE: Coding used NBT-HU
(01-10-2019, 15:27 PM)claw Wrote:(01-10-2019, 15:10 PM)Apansson Wrote: This is the output of tool32: As you can see this is what i'm trying to do, also using the SWT argument. I have written "writedatabyidentifiervin" using FSC extended. But when Reading it using cps-lesen command in tool32 i get the old VIN. After running _steuern_delete_persistency_intel_plus_swt the FSCs are still there so i can't write the FSCs from my repair kit. |
|||
01-10-2019, 15:33 PM,
(This post was last modified: 01-10-2019, 15:34 PM by DayvG.)
Post: #26
|
|||
|
|||
RE: Coding used NBT-HU
What Claw says, once you have restarted after clearing FSC using tool32. Writedataidentifierbyvin using your vin as you have a repair pack. Then store each FSC, then load the .der file in options FSC. Then use comfort mode, load FSC then upgrade button for each one. There are lots of guides for loading FSC, very similar to mine that I posted but for NBT
(01-10-2019, 15:31 PM)Apansson Wrote:(01-10-2019, 15:27 PM)claw Wrote:(01-10-2019, 15:10 PM)Apansson Wrote: This is the output of tool32: After these steps have you tried loading the FSC? I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC BMW ISPI Admin Client License (Contact for info) Complete EntryNav2 FSC solution for Retrofit/Component Protection KAFAS2 7E/BE/BF KAFAS4 11F/13E/13F Carplay activations/FullScreen/ID4-5 EntryNav2 Carplay activations OEM/Provisioning Contact me for more information |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content