Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
G21 - Code minimum speed of cruise control
06-09-2022, 12:22 PM,
Post: #1
|
|||
|
|||
G21 - Code minimum speed of cruise control
Hi there
is there any way to lower the minimum speed to use cruise control in a G21 from 2022? It was possible for the F30 in the ICM ECU. ICM -> 3000 -> C_Wunschgeschw_min_kmh kind regards |
|||
06-09-2022, 19:15 PM,
Post: #2
|
|||
|
|||
RE: G21 - Code minimum speed of cruise control
(06-09-2022, 12:22 PM)MichaelNRW Wrote: Hi there check SAS or DSC module Coding 2.0 File Service - Region Change/Typekey - SFA iDrive 8.5 REGION CHANGE
BMW Full FSC Set + CarPlay - NBT EVO ID4/5/6/ENTRYNAV2 (CP REMOVE/PATCH) MGU CARPLAY/ANDROID AUTO Activation / MGU PATCH/CP REMOVE (EU service) ISN RESET Remote F/G series BMW KAFAS 2/4 FSCs(7E/BE/BF - 11F/13E/13F) BMW KAFAS4/MRR/RAM Virgin / VIN FSC Matching |
|||
07-09-2022, 09:14 AM,
Post: #3
|
|||
|
|||
RE: G21 - Code minimum speed of cruise control
(06-09-2022, 12:22 PM)MichaelNRW Wrote: Hi there Yes, check DSC3 and SAS2 modules. I used for 20kmh: C_Wunschgeschw_min_kmh = 14 C_Wunschgeschw_min_mph = 0C C_SLD_vmin_kmh = 14 |
|||
07-09-2022, 09:31 AM,
Post: #4
|
|||
|
|||
RE: G21 - Code minimum speed of cruise control
My car has DSC_BRS, DSC_VIP_IB4 and SAS3.
I couldn‘t find any value with „wunsch“, „geschw“, „vmin“ or „kmh“ in them that could affect the cruise control. Maybe it‘s not possible because of the Driving Assistant Professional? |
|||
07-09-2022, 10:19 AM,
Post: #5
|
|||
|
|||
RE: G21 - Code minimum speed of cruise control
(07-09-2022, 09:31 AM)MichaelNRW Wrote: My car has DSC_BRS, DSC_VIP_IB4 and SAS3. That's right. DAPro is much more restrictive. EntryNav2, MGU, Evo - carplay with or without ATM, full fsc, component protection and more.
NCD 2.0 secure coding - typeschlussel (typecode) change, region change SFA Press rep & thanks if I you found this useful. PM if you need more help. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content