[lustek]

Hi,

Have car with no codding in eps. So i inject cafd and code car.
After that, i got error in ista that coding data are incorrect (pic1). Also ista propose to flash module.

But when i calculate tal i got hw differences in eps(pic2). So probably i-step shipment of this ecu are wrong. Is there a way using for example tool32 to find correct i-step of particural ecu?

OK, i know i cant flash it. Is it possible to check car model based on provided HWEL or SWFL? So I can try prepare FA and code to this car?

[Siki78]

Use I step 13-11-504 time criterium 1213 typekey WX93

[willisodhiambo]

But is HWEL is different when you calculate TAL don't you then have wrong hardware?

[lustek]

Yes still different. So i will not flash it.
I want to make as it was before injecting cafad?
How to delete cafad?

For me it is mega urgent situation. Can pay for remote assist....

[Node]

Your car originally had EPS high. Current HWEL is EPS sport. Hence your SVT soll calculation says you need to put High.

So to get EPS sport you need to use car type with sport steering, as an example already given - WX93.

Now you can use original time criterium, I have no idea why Siki proposed 13-11. IMHO HWEL A5F did not go into 13-11.

But you also need to add sport steering option 2VL.

As SVT ist was NOT provided, I will not (too laze) try this combination myself.

[iyade46]

Let me connect with teamy and have a look

[lustek]

Case closed.
@RuleNormaliai help me without even programming.
Yesterday i dont saw reply from @Node and I think i miss that option 2VL while coding with type WX93.
Thank you everybody for input.