[Spirit5676]

So I went to flash the N45 DME (EKB945) with Winkfp. Used genuine ICOM Next and power supply. ISTA shows the ecu with programming abort. Winkfp error 211:
DIAGNOSE_MODE (ECUPM):ERROR_ECU_SECURITY_ACCESS_DENIED__SECURITY_ACCESS_REQUESTED
Clear flash failed  22EK92, FLASH_LOESCHEN (...)

So clearing the flash fails, anyone knows why?

[larshutten]

Try with ista-p and/or old icom if you have it.

[m3-flo420]

Try with Icom and ISTA-P. Ista-P is good for programming abort

[Spirit5676]

Tried ISTA-P with ICOM Next, before asking here won't flash it either.

[atiwok]

flash it using winkfp and kdcan

[larshutten]

Do you have old icom? I’ve faced this kind of issues on older cars with icom next and old icom flashed it without any issue.

[Stratofortress]

All E87 files were loaded accordingly in WinKFP prior flashing? Tried flashing in Expert mode? Have not had any issues with old models using ICOM Next myself.

[jaramillo]

Use NFS..this should solve your issue

[Spirit5676]

flash it using winkfp and kdcan

I don't know how kdcan could do it if ICOM wont. I did try and same error.

Do you have old icom? I’ve faced this kind of issues on older cars with icom next and old icom flashed it without any issue.

Tried ICOM A2, same error. ICOM Next flashed the rest of the car fine.

All E87 files were loaded accordingly in WinKFP prior flashing? Tried flashing in Expert mode? Have had any issues with old models using ICOM Next myself.

Yes, the files should be correctly loaded.

Use NFS..this should solve your issue

NFS didn't help either, same errors are winkfp.

[bmchicago]

try ISTAp first