Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ i3 error - 48070D & E06C43
09-01-2023, 15:36 PM,
(This post was last modified: 15-01-2023, 20:56 PM by Clusters.)
Post: #1
|
|||
|
|||
i3 error - 48070D & E06C43
Hello
A very strange problem. Just changed the front brake pads for the 1. time Pads and wear indicator is org. BMW After that - DSC and KAFAS is now in a bad mood. Can't get it reset and free from failure. There was no error before. 400V and 12V has been disconnected for hours - stil same result. ISTA+ says for DSC - that it must be renewed.... omg Anyone seen this and recovered from it ? Denmark E46 Compact 316 ti | i3 - BEV 07/2014 |
|||
09-01-2023, 17:01 PM,
Post: #2
|
|||
|
|||
RE: i3 error - 48070D & E06C43
Have a go with Esys and flash DSC and ICM and see how that goes.
|
|||
09-01-2023, 18:36 PM,
Post: #3
|
|||
|
|||
RE: i3 error - 48070D & E06C43
What happens when you run the test plan in ista for the valve adjustment?
| BimmerFiks AS | Instagram | |
|||
11-01-2023, 15:09 PM,
Post: #4
|
|||
|
|||
RE: i3 error - 48070D & E06C43
Try to flash DSC unit with esys.
|
|||
15-01-2023, 17:51 PM,
(This post was last modified: 15-01-2023, 17:53 PM by Darmand.)
Post: #5
|
|||
|
|||
RE: i3 error - 48070D & E06C43
Hi all
After reading and trying many things (DSC flash, complete encoding and more) - I read that some had air in brakesystem after replacing Pads ??? Haven't tried that before,- that ait enters the brake system and from where? Normal bleed - stil same issue. Extra bleed procedure from tester - it works! Air in system after replacing Pads cause DSC & KAFAS error Solved Denmark E46 Compact 316 ti | i3 - BEV 07/2014 |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content