Hey chaps
Interesting issue faced
2011 VW Caddy
Tried to restore coding with ODIS but received the fault cannot code
Looking at the logs the following codes have been retrieved from VAG servers including 11908 login code but ODIS cannot complete.
Can anyone suggest why?
Or could anyone construct a ABS code for me to try with VCDS using the data returned from ODIS?
Failing that Im thinking faulty ABS controller or its been replaced with the wrong part already and therefore ODIS cannot correct with the OEM coding.
Code:
-
[ltr]Test step: KWP coding[/ltr]
[ltr]Action: Report[/ltr]
Coding of the control module Brake electronics is being performed.
- Please wait...
[ltr]Control unit communication (KWP):[/ltr]
Control unit: Brake Electronics (LL_Brake1KWP2000CAN20)
[ltr]Job status: ERROR_NRC_ServiceNotSupported:SServiceID:ResponseCode[/ltr]
[ltr]Service: ReadECUIdentification[/ltr]
[ltr][/ltr]
[ltr]Request parameters: [/ltr]
[ltr]Number[/ltr]
[ltr]Value[/ltr]
[ltr][/ltr]
1
[ltr]Response parameters:[/ltr]
No response parameters
[ltr]Control unit communication (KWP):[/ltr]
Control unit: Brake Electronics (LL_Brake1KWP2000CAN20)
[ltr]Job status: OKAY[/ltr]
[ltr]Service: ReadECUIdentification2[/ltr]
[ltr]Request parameters: [/ltr]
[ltr]Number[/ltr]
[ltr][/ltr]
[ltr]Value[/ltr]
1
2
0
[ltr]Response parameters:[/ltr]
[ltr]Name[/ltr]
[ltr]Value[/ltr]
/OdisResultVariant
BRE6000
[ltr]Control unit communication (KWP):[/ltr]
Control unit: Brake Electronics (LL_Brake1KWP2000CAN20)
[ltr]Job status: ERROR_NRC_SubFunctionNotSupported:ServiceID:ResponseCode[/ltr]
[ltr]Service: Login[/ltr]
[ltr]Request parameters: [/ltr]
[ltr]Number[/ltr]
[ltr]Value[/ltr]
1
8000000c86a3
2
******
3
0
[ltr]Response parameters:[/ltr]
No response parameters
[ltr]Control unit communication (KWP): [/ltr]
Control unit: Brake Electronics (LL_Brake1KWP2000CAN20)
[ltr]Job status: ERROR_NRC_ServiceNotSupported:ServiceID:ResponseCode[/ltr]
[ltr]Service: WriteCodingValue2[/ltr]
[ltr]Request parameters:[/ltr]
[ltr]Number[/ltr]
[ltr]Value[/ltr]
1
8000000c86a3
2
11908
[ltr]Response parameters:[/ltr]
No response parameters
[ltr]Control unit communication (KWP):[/ltr]
Control unit: Brake Electronics (LL_Brake1KWP2000CAN20)
[ltr]Job status: ERROR_NRC_SubFunctionNotSupported:ServiceID:ResponseCode[/ltr]
[ltr]Service: WriteCodingValueS2E[/ltr]
[ltr]Request parameters: [/ltr]
[ltr]Number[/ltr]
[ltr][/ltr]
[ltr]Value[/ltr]
1
8000000c86a3
2
63400903C60290C081
300000
3
-1
[ltr]Response parameters:[/ltr]
[ltr][/ltr]
No response parameters
[ltr]Control unit communication (KWP): [/ltr]
Control unit: Brake Electronics (LL_Brake1KWP2000CAN20)
[ltr]Job status: ERROR_NRC_SubFunctionNotSupported:ServiceID:ResponseCode[/ltr]
[ltr]Service: WriteCodingValue2S2E[/ltr]
[ltr]Request parameters:[/ltr]
[ltr]Number[/ltr]
[ltr][/ltr]
[ltr]Value[/ltr]
1
8000000c86a3
2
63400903C60290C081
300000
3
0
4
-1
[ltr]Response parameters:[/ltr]
No response parameters
Test step: Overrun-
[ltr]Test step: Evaluate condition[/ltr]
[ltr]Action: Report[/ltr]
Coding of the system Brake electronics was not successful.
