[Yhwsha]

Question:

Hello members:

Can BMW vehicles that is equipped with a MOST bus line for media coding & programming be used for all other modules to code & program which are Non media?

Or do other modules which is non media type like DME , CAS, IHKA, FRM, FZD EGS, ETC..can be programmed without the MOST port line?

If so, what are the extra modules?
Can the K+Dcan cable be used to Code & Programmed BMWs with a most port if its not a media module?

[ap90500]

In theory you can flash all non-most modules with K+DCAN, by using winkfp. Personally I would not flash for example DME/DDE with K+DCAN, there are module types that will probably fail while doing it. If you want to flash, just buy ICOM A + B (+C).

[BMWF01]

In theory you can flash all non-most modules with K+DCAN, by using winkfp. Personally I would not flash for example DME/DDE with K+DCAN, there are module types that will probably fail while doing it. If you want to flash, just buy ICOM A + B (+C).

I have original ICOMA2 but how to set up the connection with inpa & ediabas ?

I never done it before, have anyone tried it.?
Can u please share the settings with me for ip address go where and so on?