Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW MOST Modules & Non MOST Modules be Coded & Programming
15-06-2015, 21:01 PM,
Post: #1
|
|||
|
|||
BMW MOST Modules & Non MOST Modules be Coded & Programming
Question:
Hello members: ![]() Or do other modules which is non media type like DME , CAS, IHKA, FRM, FZD EGS, ETC..can be programmed without the MOST port line? If so, what are the extra modules? Can the K+Dcan cable be used to Code & Programmed BMWs with a most port if its not a media module? |
|||
Reputation: +2 - BMWF01 [+1] , Yah [+1] | |||
16-06-2015, 08:25 AM,
Post: #2
|
|||
|
|||
RE: BMW MOST Modules & Non MOST Modules be Coded & Programming
In theory you can flash all non-most modules with K+DCAN, by using winkfp. Personally I would not flash for example DME/DDE with K+DCAN, there are module types that will probably fail while doing it. If you want to flash, just buy ICOM A + B (+C).
|
|||
Reputation: +1 - Yah [+1] | |||
27-09-2015, 21:26 PM,
Post: #3
|
|||
|
|||
RE: BMW MOST Modules & Non MOST Modules be Coded & Programming
(16-06-2015, 08:25 AM)ap90500 Wrote: In theory you can flash all non-most modules with K+DCAN, by using winkfp. Personally I would not flash for example DME/DDE with K+DCAN, there are module types that will probably fail while doing it. If you want to flash, just buy ICOM A + B (+C).I have original ICOMA2 but how to set up the connection with inpa & ediabas ? I never done it before, have anyone tried it.? Can u please share the settings with me for ip address go where and so on? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content