Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Is it possible to code out tpms on 2007 328xi?
16-08-2016, 09:49 AM,
Post: #1
|
|||
|
|||
Is it possible to code out tpms on 2007 328xi?
I recently had that pop up as a tpms malfuntion....i checked all my tires and there good ....is there anyway to code out that sensor???/get back to me asap tia
|
|||
16-08-2016, 10:30 AM,
Post: #2
|
|||
|
|||
RE: Is it possible to code out tpms on 2007 328xi?
(16-08-2016, 09:49 AM)freshazfuk Wrote: I recently had that pop up as a tpms malfuntion....i checked all my tires and there good ....is there anyway to code out that sensor???/get back to me asap tia Yes it is In KOMBI set "RDC_ALIVE." to not active and maybe remove TPMS from VO. This can all be done with NCS. BR |
|||
16-08-2016, 13:14 PM,
Post: #3
|
|||
|
|||
RE: Is it possible to code out tpms on 2007 328xi?
Depending on what idrive system you have maybe you need to code some more. You have a CCC or a CIC? Both were available in 2007
|
|||
16-08-2016, 18:51 PM,
Post: #4
|
|||
|
|||
RE: Is it possible to code out tpms on 2007 328xi?
Delete "2VB" from FA, unplug the RDC ECU and code KOMBI, CCC and DSC.
|
|||
07-09-2016, 12:21 PM,
Post: #5
|
|||
|
|||
RE: Is it possible to code out tpms on 2007 328xi?
Disconnect module first.
Then remove 2VB from the FA/VO. Expertmode car completely OR SG_codieren and code the DSC, KOMBI and NFRM modules. (For M3 cars it would be M3DSC). CAPPL/CIC is also needed to be coded if you have a navigation. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content