Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA 4.01.21 Standalone - Mega
11-09-2016, 21:38 PM,
Post: #111
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(11-09-2016, 16:55 PM)Polo08816 Wrote:(10-09-2016, 22:12 PM)Almaretto Wrote:(10-09-2016, 18:52 PM)Polo08816 Wrote:(10-09-2016, 15:02 PM)aboulfad Wrote:(10-09-2016, 13:56 PM)masa52 Wrote: With icom programing working fine, so icom its necessary even to do measuring planI used to get an error when trying to do the measures plan with ENET. like I said, it seems ICOM is required for the software update related procedures in ISTA/D. I have the same PSU, but never tried programming a G series. What are you setting voltage at? |
|||
12-09-2016, 13:30 PM,
Post: #112
|
|||
|
|||
RE: ISTA-D 4.01.21 Standalone - Mega
(08-09-2016, 22:32 PM)hulahans Wrote: Flashed today with icom next, Dear hulahans: You're right.so it‘s time to dig its expert mode for single module programing like ISTA/P.then it will become perfect.And make Eth valid for this new ISTA diag and programming function is very powerful for anybody don't have ICOM.for all CT members who have ability to do it.thx in advance. |
|||
12-09-2016, 18:54 PM,
Post: #113
|
|||
|
|||
RE: ISTA 4.01.21 Standalone - Mega
Please help me out here, what do I have wrong for database error
|
|||
12-09-2016, 19:02 PM,
Post: #114
|
|||
|
|||
RE: ISTA 4.01.21 Standalone - Mega
(12-09-2016, 18:54 PM)interested Wrote: Please help me out here, what do I have wrong for database error Your ProductVersion is wrong: |
|||
12-09-2016, 19:15 PM,
Post: #115
|
|||
|
|||
RE: ISTA 4.01.21 Standalone - Mega
(12-09-2016, 19:02 PM)Almaretto Wrote: [quote='interested' pid='182066' dateline='1473706491'] Your ProductVersion is wrong: Thanks for the fast response, it didn't work, but from that I did the following and got it going... |
|||
12-09-2016, 20:28 PM,
Post: #116
|
|||
|
|||
RE: ISTA 4.01.21 Standalone - Mega
Will look into when I get home pretty sure it doe not like win 01 or 8.1 have not had any problems like this since this version and yes I used new license.
|
|||
12-09-2016, 21:41 PM,
Post: #117
|
|||
|
|||
RE: ISTA 4.01.21 Standalone - Mega
Are you running the reg fix from the Rheingold folder?
The regfix should add all these values. |
|||
12-09-2016, 23:06 PM,
Post: #118
|
|||
|
|||
RE: ISTA 4.01.21 Standalone - Mega
Hi!
I tested yesterday, and is work fine. Why there are modules, after test on the control unit tree, that they are not built into the car. E.g EGS, DSP, NAV etc. Sorry my bad english. |
|||
13-09-2016, 01:39 AM,
Post: #119
|
|||
|
|||
RE: ISTA 4.01.21 Standalone - Mega
I not sure if this will help , I ran into similar situation , try running istagui as admin work for me win10 64bit pro and win8.1 enterprise
|
|||
13-09-2016, 15:43 PM,
Post: #120
|
|||
|
|||
RE: ISTA 4.01.21 Standalone - Mega
(12-09-2016, 23:06 PM)Qwerti Wrote: Hi! ISTA/D has been like this on a few models now, even though it has identified the car as a manual, it will still show unfitted ECUs like EGS in grey. Green=good Orange=fault Red = Should be fitted but no communication Grey = Possible ECU location in the diagnostic tree Blue = ECU stuck in programming mode. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
5 Guest(s)
5 Guest(s)
Return to TopReturn to Content