Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
13-11-2017, 22:40 PM,
Post: #581
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
I have an issue with this... I tried it before and it worked perfectly but I needed to reflash my CIC with 62.0 and once it was completed I lost my Navi and everything else.It seem it virginized itself.
When I put in the USB stick, no reboots but when i use E-Sys and do the first steps in the How-To. I get the Message Results OK for both of steps 2, I could sign the FSC but when I try to write the FSC to the car, I get an error "code: RoutineControl returned negative response description: service Routine Control Verify FSC returned positive response with with result status = FSCS_CERT_CHECK_FAILURE; ECU: HU_CIC_63_ETHERNET severity: ERROR" What could be the problem? I have an early 2010 production 2011 F10', I retrofitted Combox to it only |
|||
14-11-2017, 15:54 PM,
Post: #582
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
I am stuck at "StoreSIGCert".
I followed the procedure to store "Sig" but it shows an error "Error: Please enter an Application Number and an Upgrade Index first". I do not see the howto that says I need to input them when doing this step. Anyone help me out of this. Thanks. |
|||
14-11-2017, 21:15 PM,
Post: #583
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(14-11-2017, 15:54 PM)ChrisF30 Wrote: I am stuck at "StoreSIGCert".Hi, put in fstool/parameter/Diagnose adress:63 Appl.-Nr.:1B,19,17...Upgrade index:1 VIN: Car's vin and try again. |
|||
14-11-2017, 21:32 PM,
Post: #584
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
Update on my post, I tried another USB Stick with NTSC format and the system rebooted itself but I'm still getting the error when I try to upload the FSC
Anyone know the solution for this? |
|||
14-11-2017, 23:37 PM,
Post: #585
|
|||
|
|||
RE: BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS
(14-11-2017, 21:32 PM)milzgatez Wrote: Update on my post, I tried another USB Stick with NTSC format and the system rebooted itself but I'm still getting the error when I try to upload the FSC When you flashed the CIC you probably overwrote the new root certificates with the original ones which is why your FSCs now fail. I had issues with entering the FSCs and the only solution was to FTP a blank generalPersistencyData_DiagnosticsSWTController file onto the CIC and then re-enter everything. I think the procedure is mentioned earlier in the thread. |