[Stromag]

I got everything working (finally) but when I try to diagnose my own car I got this: The Programming system could not be initialized. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA if problems persist contact local support.

I selected the ENET connection but yet I don't see KL15 and KL30
With DR. Gini program I can see 14 volts behind those 2...

Ant idea where I’m doing wrong...?

Same problem. Did the diagnosis with the ENET cable.

The database versions must match

[pdc]

I got everything working (finally) but when I try to diagnose my own car I got this: The Programming system could not be initialized. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA if problems persist contact local support.

I selected the ENET connection but yet I don't see KL15 and KL30
With DR. Gini program I can see 14 volts behind those 2...

Ant idea where I’m doing wrong...?

Same problem. Did the diagnosis with the ENET cable.

The database versions must match

---

maybe you do not have sdp installed,check under data swi if you have files.
This error results from absence of sdp data or wrong installation place for data_swi.

[Shinoby]

I got everything working (finally) but when I try to diagnose my own car I got this: The Programming system could not be initialized. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA if problems persist contact local support.

I selected the ENET connection but yet I don't see KL15 and KL30
With DR. Gini program I can see 14 volts behind those 2...

Ant idea where I’m doing wrong...?

Same problem. Did the diagnosis with the ENET cable.

The database versions must match

---

maybe you do not have sdp installed,check under data swi if you have files.
This error results from absence of sdp data or wrong installation place for data_swi.

Why need SDP, if I use ENET cable. I think SDP and BLP files need if use ICOM. Or for ENET cable need too?

---

I got everything working (finally) but when I try to diagnose my own car I got this: The Programming system could not be initialized. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA if problems persist contact local support.

I selected the ENET connection but yet I don't see KL15 and KL30
With DR. Gini program I can see 14 volts behind those 2...

Ant idea where I’m doing wrong...?

Same problem. Did the diagnosis with the ENET cable.

The database versions must match

Database - SQLiteDBs?

[Stromag]

I got everything working (finally) but when I try to diagnose my own car I got this: The Programming system could not be initialized. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA if problems persist contact local support.

I selected the ENET connection but yet I don't see KL15 and KL30
With DR. Gini program I can see 14 volts behind those 2...

Ant idea where I’m doing wrong...?

Same problem. Did the diagnosis with the ENET cable.

The database versions must match

---

maybe you do not have sdp installed,check under data swi if you have files.
This error results from absence of sdp data or wrong installation place for data_swi.

Why need SDP, if I use ENET cable. I think SDP and BLP files need if use ICOM. Or for ENET cable need too?

---

I got everything working (finally) but when I try to diagnose my own car I got this: The Programming system could not be initialized. The ISTA installation may be damaged or incorrectly configured. Reinstall ISTA if problems persist contact local support.

I selected the ENET connection but yet I don't see KL15 and KL30
With DR. Gini program I can see 14 volts behind those 2...

Ant idea where I’m doing wrong...?

Same problem. Did the diagnosis with the ENET cable.

The database versions must match

Database - SQLiteDBs?

Exactly those must match with the version .. Does the error come after reading the error memory?

[Shinoby]

Exactly those must match with the version .. Does the error come after reading the error memory?

Version of SQLiteDBs 4.08.20 correct.
Yes, Error come after reading the error memory.

[Ibrahim24]

Yes like Shinoby said.. After reading error memory.

[pdc]

You cannot program with enet,with ista just diagnose,with enet do it with esys. ,only with icom,and SDP and BLP are program files so you would need it any way ,independently from interface icom or other.
Maybe that is the reason for your error ,using enet with ista programming.

[Shinoby]

You cannot program with enet,with ista just diagnose,with enet do it with esys. ,only with icom,and SDP and BLP are program files so you would need it any way ,independently from interface icom or other.
Maybe that is the reason for your error ,using enet with ista programming.

Please read attentively previous my post. I did diagnostic and read errors!

[pdc]

Hi

you do not understand...

You can do diagnostic, but you cannot flash your ecus on the car.
If it is only diagnosis you do not have problems...just the message in the beginning.

[Ibrahim24]

Hi

you do not understand...

You can do diagnostic, but you cannot flash your ecus on the car.
If it is only diagnosis you do not have problems...just the message in the beginning.

So that's just a issue we can "skip".
Got it.

One more question, I wanted to diagnose my friends car with a K-Can.
But I just can't seem to make connection.
All I get is:

The Vehicle could not be identified. Please Check the access to the vehicle and check whether the testing-analysis-diagnos has been activated.

After pressing OK I get this:

The program can't start because MSVCP120.DLL is missing from your computer. Try reinstalling the program to fix this problem.

I tried changing the Ediabas setting but yet no connection.

Could someone please show me a direction, please?