[konstantin82]

Ok thanks a lot

I will try to find multiplexer

Name of that multiplexer is StarDiagnosis C3 or SdConnect C4 or new Mercedes Diagnostic VCI

[HERVE06300]

Yes I know I have a C3 with VMware but not work

[konstantin82]

Yes I know I have a C3 with VMware but not work

What say sdnet toolkit?

[ecudiag]

Hello. I have problem with VAS. If i try delate dtc das ask me pls ignition off, i dont try off. I have always on.

any suggestion ?

[sixcode]

Hello. I have problem with VAS. If i try delate dtc das ask me pls ignition off, i dont try off. I have always on.

any suggestion ?

here is a suggestion, google it, solution is easy

[luisjmh27]

Hi

Thanks for share program and video instructions. I've put it on a VirtualBox machine W7 X86 and works fine with Autel MaxiElite J2534. On vehicles that aren't on Euro 5 only can diagnostique ECU engine

Regards

[jal1234]

Does the VAS5054A need a working Oki chip for pass thru to work on Mercedes? My clone is supposed to have an Oki chip, but it is fake (clipped lead).

Sent from my Nexus 5 using Tapatalk

[sixcode]

Does the VAS5054A need a working Oki chip for pass thru to work on Mercedes? My clone is supposed to have an Oki chip, but it is fake (clipped lead).

Sent from my Nexus 5 using Tapatalk

oki chip is old protocol so no in this case

[jal1234]

Sixcode,
Thanks for that. One more question. My unit has an upside down A5780A, which likely means it is also fake. Is that necessary for Mercedes passthru?

[Enabled]

A5780A is for J1850 VPW protocol, General Motors protocol.

OKI is for J1850 PWM protocol, Ford Motors protocol.