Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Digiprog vag no connection problem
06-06-2014, 18:04 PM,
Post: #1
|
|||
|
|||
Digiprog vag no connection problem
Hi all
When i try to connect digiprog to some Audi-seat-skoda-vw cars before 2008 i get no connection error. I think it is a broblem of my unit.Does anyone has the same problem? Any solution? I believe there is solution for that. My unit is 4.88 original yanhua |
|||
06-06-2014, 19:15 PM,
Post: #2
|
|||
|
|||
RE: Digiprog vag no connection problem
For example what year
|
|||
06-06-2014, 19:18 PM,
Post: #3
|
|||
|
|||
RE: Digiprog vag no connection problem
|
|||
06-06-2014, 19:57 PM,
Post: #4
|
|||
|
|||
RE: Digiprog vag no connection problem
Q23-Q26 transistors burned down.The signal is on to the K-line?
|
|||
Reputation: +1 - C(A)R [+1] | |||
06-06-2014, 20:03 PM,
Post: #5
|
|||
|
|||
RE: Digiprog vag no connection problem
Do not you have a problem with the line k in digiprog?
I know that there were problems with all this line and vehicles, which have the same lines, digiprog not connect. Strange, because vehicles in 2008 are on Can, not on the line K. Contact the seller if you have it under warranty, then you can fix it. |
|||
06-06-2014, 20:53 PM,
Post: #6
|
|||
|
|||
RE: Digiprog vag no connection problem
Does anyone knows where is k-line in digiprog.Mabe if i change resistors capacitors or switches in digiprog will solve my problem
|
|||
07-06-2014, 20:13 PM,
Post: #7
|
|||
|
|||
RE: Digiprog vag no connection problem
|