[mikechang0823]

Hi Everyone,
My car is G30.I had got FSC code from this community.How to import these codes using eSYS in order to fix kafas4 for SLI function? Could you provide step by step direction for me? Thank you in advance.

[Almaretto]

1. Export Mode > FSC-Extended
2. Diag Address: 0x5d
3. Press Identify
4. From list: Select “StoreFSC” and press “>>” button. Select “CheckFSC” and press “>>” button.
6. At end of "FSC:" box, Press “…” button and select “FSC_XXXXXXX_######.fsc” file.
7. Press “Start” button and check for two “ok” results.
8. Repeat step 6 as needed.

[mikechang0823]

Hi Almaretto
How to get or buy FSC code for KAFAS4 of G30?

1. Export Mode > FSC-Extended
2. Diag Address: 0x5d
3. Press Identify
4. From list: Select “StoreFSC” and press “>>” button. Select “CheckFSC” and press “>>” button.
6. At end of "FSC:" box, Press “…” button and select “FSC_XXXXXXX_######.fsc” file.
7. Press “Start” button and check for two “ok” results.
8. Repeat step 6 as needed.

[emhtuning]

Hi Almaretto
How to get or buy FSC code for KAFAS4 of G30?

1. Export Mode > FSC-Extended
2. Diag Address: 0x5d
3. Press Identify
4. From list: Select “StoreFSC” and press “>>” button. Select “CheckFSC” and press “>>” button.
6. At end of "FSC:" box, Press “…” button and select “FSC_XXXXXXX_######.fsc” file.
7. Press “Start” button and check for two “ok” results.
8. Repeat step 6 as needed.

you just said that you already got ( bought maybe ) FSC from someone here , now you are asking how to buy ? 

[mikechang0823]

Hi,
I had got FSC code from others before.But I import these code follow Almaretto’s instructions that there are some error happened using eSYS. So I think I need to get or buy them again.Could you have one way to help me?

Hi Almaretto
How to get or buy FSC code for KAFAS4 of G30?

1. Export Mode > FSC-Extended
2. Diag Address: 0x5d
3. Press Identify
4. From list: Select “StoreFSC” and press “>>” button. Select “CheckFSC” and press “>>” button.
6. At end of "FSC:" box, Press “…” button and select “FSC_XXXXXXX_######.fsc” file.
7. Press “Start” button and check for two “ok” results.
8. Repeat step 6 as needed.

you just said that you already got ( bought maybe ) FSC from someone here , now you are asking how to buy ? 

[luntik]

1. Export Mode > FSC-Extended
2. Diag Address: 0x5d
3. Press Identify
4. From list: Select “StoreFSC” and press “>>” button. Select “CheckFSC” and press “>>” button.
6. At end of "FSC:" box, Press “…” button and select “FSC_XXXXXXX_######.fsc” file.
7. Press “Start” button and check for two “ok” results.
8. Repeat step 6 as needed.

What's the difference between this way and another one with Comfort Mode > FSC? Is it the same? 
While using Comfort Mode it is also necessary to point out the certificate in options

[Almaretto]

1. Export Mode > FSC-Extended
2. Diag Address: 0x5d
3. Press Identify
4. From list: Select “StoreFSC” and press “>>” button. Select “CheckFSC” and press “>>” button.
6. At end of "FSC:" box, Press “…” button and select “FSC_XXXXXXX_######.fsc” file.
7. Press “Start” button and check for two “ok” results.
8. Repeat step 6 as needed.

What's the difference between this way and another one with Comfort Mode > FSC? Is it the same? 
While using Comfort Mode it is also necessary to point out the certificate in options

Not sure. Never tried in Comfort Mode.

[gongaho]

1. Export Mode > FSC-Extended
2. Diag Address: 0x5d
3. Press Identify
4. From list: Select “StoreFSC” and press “>>” button. Select “CheckFSC” and press “>>” button.
6. At end of "FSC:" box, Press “…” button and select “FSC_XXXXXXX_######.fsc” file.
7. Press “Start” button and check for two “ok” results.
8. Repeat step 6 as needed.

What's the difference between this way and another one with Comfort Mode > FSC? Is it the same? 
While using Comfort Mode it is also necessary to point out the certificate in options

Not sure. Never tried in Comfort Mode.

I'm also curious about the differences between Comfort Mode and Expert Mode, and I also saw the guide with Comfort Mode said that you should setup the .der file firstly before import FSC file. Link below:

[Stromag]

Comfort mode is faster and easier.  Takes about 1-2 minutes and the FSC is in it.  You do not need a certificate or anything else, just the FSC and you're done.

[gongaho]

Comfort mode is faster and easier.  Takes about 1-2 minutes and the FSC is in it.  You do not need a certificate or anything else, just the FSC and you're done.

So what is the .der certificate file used for?

Thanks.