Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Xhorse vvdi2 tool Technical Support & Feedback
07-11-2018, 15:54 PM,
Post: #151
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
hello czozen
fem authorization with vvdi2 not good till now a lots of vvdi2 fem users having same issue and some not even work no new and old key they stop working hope they fix it regards Always new stuff to learn
Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
08-11-2018, 22:06 PM,
Post: #152
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
Hi is any1 successfully change ISN in MSD81 with vvdi2 ?
|
|||
17-12-2018, 01:59 AM,
Post: #153
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
Can I share a news here?Because I think it's a good news
The xhorse free token for vvdi mb and vvdi 96bit 48 clone! Vaild---Feb 25,2019 |
|||
17-12-2018, 14:00 PM,
(This post was last modified: 17-12-2018, 14:01 PM by Impac.)
Post: #154
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
Also interested if VVDI2 can Read and Write MSD80 and MSD81 ISN, seen couple of videos on youtube and vvdi2 gave an error VERSION NOT SUPPORTED
|
|||
08-02-2019, 17:07 PM,
Post: #155
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
is VVDI2 j2534 pass-through working with techstream now?
|
|||
05-04-2019, 09:00 AM,
Post: #156
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
Hi
I have a question, with vvdi2 I can program ecu (EDC17C64) second hand in the seat leon III ? |
|||
05-04-2019, 17:50 PM,
Post: #157
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
hello i have a situation with vvdi key tool i tried to clone a key from citroen c4 2006
all steps go ok when i put the special transponder id 46 made by xhorse for cloning id 46 screen show for the moment dont suport writing this transponder |
|||
05-04-2019, 20:47 PM,
(This post was last modified: 05-04-2019, 22:36 PM by Clusters.)
Post: #158
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
(05-04-2019, 17:50 PM)klisenko Wrote: hello i have a situation with vvdi key tool i tried to clone a key from citroen c4 2006I Did actually clone a peugeot 407 successfully with VVDI key tool, perharps try using another transponder. |
|||
19-04-2019, 01:38 AM,
Post: #159
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
My experience for BMW on the latest firmware:
CAS1-OBD good CAS2-OBD mostly good, had EWS tampering fault code with no-start once.. cleared with ISTA/D sync. CAS3-OBD good CAS3+(+)/encrypted /ista-p version-OBD very bad! downgrading bricked a few CAS modules -> much safer by soldering and making key from EEP dump. CAS3+(+)/encrypted/ista-p version is very good if you do it via File make key. DO NOT write new EEP dump back, even if it tells you to. The key will work fine without writing back the modified dump and in fact writing the modified eeprom could brick your CAS in my experience. CAS4(+) via soldering also very good and safe. you need good skills with hot air soldering and good flux. FEM/BDC- only tried once on a bench setup.. worked fine with the test bench but never tried it on a real car. What are most experiences with the FEM/BDC? Problems with programming? Bricked FEM/BDC? Keys not working? Original keys not working,....? |
|||
Reputation: +1 - lock66 [+1] | |||
03-05-2019, 05:53 AM,
Post: #160
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
Hello I have a Problem with a BDC BMW after update and restore eeprom data, not work no communication, I dont remember if I mistake and use eeprom clamp with 12v connected if I do it what happen eeprom die or some other component, is reparable? how can test what happen? or maybe the programmer fail in update module for unlock, any help is appreciate thanks
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content