ATTENTION !! Users which have not any posts were deleted !
  1. New Emulator

  2. Julie Emulator

  3. Immo Bypass

  4. HEXPROG



CGDI BMW Keytool Feedback
17-03-2018, 17:31 PM, (This post was last modified: 17-03-2018, 17:49 PM by ROD-BENDERS.)
Post: #1
CGDI BMW Keytool Feedback
All feedback from owners of CGDI BMW keytool post here please guys happy

ALL VAG ECU/BCM control units CS-MAC - CLONE/DATA EXTRACTION here: bowtime skype:  PM
For tuning Files I ask : 1. Zenter Performance tuning yes 2Remap Ross tuning  yes 3. Vision diesel tuning  yes   4. Loki954 tuning yes bow
Reputation: +2 - CHIKODIAG [+1] , raffy haddad [+1]
Quote this message in a reply
[-] The following 26 users say Thank You to ROD-BENDERS for this post:
  • achraf, achraf, achraf, antonypaul, CHIKODIAG, CHIKODIAG, CHIKODIAG, Chipshop, Chipshop, Chipshop, Cniksor, Cniksor, Cniksor, Gabriel87, Kenny, Kenny, Kenny, raffy haddad, raffy haddad, raffy haddad, Silva1337, Silva1337, Silva1337, volavka, volavka, volavka
19-03-2018, 11:04 AM,
Post: #2
RE: CGDI BMW Keytool Feedback
(17-03-2018, 17:31 PM)ROD-BENDERS Wrote:  All feedback from owners of CGDI BMW keytool post here please guys happy

Excellent tool so far. no bricks or problems.

extremely fast for cas1, 2 & 3

for cas3+ if need downgrade 10 minutes and seems safe, ISN read from DME 10 minutes does not support all DME is down side.

make sure you have proper power on the car

cas4 /+ did not check.
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[-] The following 14 users say Thank You to ahmadarifai for this post:
  • antonypaul, Cniksor, Cniksor, Cniksor, JarsaR, JarsaR, JarsaR, Kenny, Kenny, Kenny, MasterA2L, ROD-BENDERS, ROD-BENDERS, ROD-BENDERS
19-03-2018, 15:59 PM, (This post was last modified: 19-03-2018, 16:00 PM by slaw1971.)
Post: #3
RE: CGDI BMW Keytool Feedback
cas4 F10 - ok (new key)
cas4+ F10 - ok (new key) isn from org key or dump DME
fem/bdc F31 - ok - reset mileage, change isn, change vin, make keys with oryginal key and with dump from DDE
cas3+ E60- ok , downgrade and make key with isn from org key
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[-] The following 15 users say Thank You to slaw1971 for this post:
  • abdoo, antonypaul, Cniksor, Cniksor, Cniksor, HeXeN, HeXeN, HeXeN, Kenny, Kenny, Kenny, MasterA2L, ROD-BENDERS, ROD-BENDERS, ROD-BENDERS
20-03-2018, 07:30 AM,
Post: #4
RE: CGDI BMW Keytool Feedback
i was thinking of getting this tool, i currently have ak90 mainly for ews4 and multi tool v7.7 i use for cas. i want to be able to make cas4 as well so i think cdgi would be good for me.

questions. on tool info it says supports bmw key unlock, does that mean i can reuse a old key and reprogram it?

also how safe if downloading for cas3+, i only ran into this issue one time and i did not downgrade as worried mess things up. im curious how well this programmer works. if anyone who has this doesnt mind me messaging them with questions ill appreciate it.
Quote this message in a reply
03-04-2018, 06:20 AM,
Post: #5
RE: CGDI BMW Keytool Feedback
(20-03-2018, 07:30 AM)Cniksor Wrote:  i was thinking of getting this tool, i currently have ak90 mainly for ews4 and multi tool v7.7 i use for cas. i want to be able to make cas4 as well so i think cdgi would be good for me.

questions. on tool info it says supports bmw key unlock, does that mean i can reuse a old key and reprogram it?

also how safe if downloading for cas3+, i only ran into this issue one time and i did not downgrade as worried mess things up. im curious how well this programmer works. if anyone who has this doesnt mind me messaging them with questions ill appreciate it.
Yes, you can reuse an old key and reprogram it.
and yes it is safe if downgrade for CAS3+.
Please believe me.cheers
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[-] The following 12 users say Thank You to sunshine2018 for this post:
  • ahmadarifai, ahmadarifai, ahmadarifai, Cniksor, Cniksor, Cniksor, Kenny, Kenny, Kenny, ROD-BENDERS, ROD-BENDERS, ROD-BENDERS
07-04-2018, 06:06 AM,
Post: #6
RE: CGDI BMW Keytool Feedback
So I purchased the cgdi programer. I figured out how make key for cas2-3 but I can’t figure out how to use this programer for cas4? I tried looking online but only find for cas3,no instructions for cas4, can anyone tell me steps for cas4 I have f10 I can try one.
Quote this message in a reply
07-04-2018, 07:22 AM,
Post: #7
RE: CGDI BMW Keytool Feedback
(07-04-2018, 06:06 AM)Cniksor Wrote:  So I purchased the cgdi programer. I figured out how make key for cas2-3 but I can’t figure out how to use this programer for cas4? I tried looking online but only find for cas3,no instructions for cas4, can anyone tell me steps for cas4 I have f10 I can try one.
Cas4 can only be done by reading DFlash from Freescale cpu then load into programmer software and generade key. It can no ne done by obd.

You need xprog or vvdi prog to read the dflash.

Sent from my Pixel 2 using Tapatalk
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[-] The following 6 users say Thank You to rautolock for this post:
  • Kenny, Kenny, Kenny, ROD-BENDERS, ROD-BENDERS, ROD-BENDERS
10-04-2018, 21:47 PM,
Post: #8
RE: CGDI BMW Keytool Feedback
CGDI BMW need to pay every 6 month subscription same as CGDI Mercedes ?
Quote this message in a reply
11-04-2018, 06:55 AM,
Post: #9
RE: CGDI BMW Keytool Feedback
(10-04-2018, 21:47 PM)HeXeN Wrote:  CGDI BMW need to pay every 6 month subscription same as CGDI Mercedes ?

no
work like VVDI2 - synchronization every mounth
Quote this message in a reply
[-] The following 3 users say Thank You to slaw1971 for this post:
  • HeXeN, HeXeN, HeXeN
12-04-2018, 15:27 PM,
Post: #10
RE: CGDI BMW Keytool Feedback
Can you tell me if CGDI has same or more functions than vvdi2 bmw activation? thanks
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW Xhorse vvdi bmw tool Technical Support & Feedback huzionet 58 9,339 07-08-2020, 18:47 PM
Last Post: onliest
0Immo Xhorse vvdi2 tool Technical Support & Feedback volavka 189 68,077 07-08-2020, 05:31 AM
Last Post: raffy haddad
  HEXTAG By Microtronik Support / Feedback volavka 143 30,100 05-08-2020, 05:46 AM
Last Post: MTKAutoHex
YTMercedes CGDI MB BenzMonster key tool feedback obdtool 139 50,016 30-07-2020, 08:24 AM
Last Post: 12manux
0Immo Renolink Support/Feedback volavka 43 13,763 15-07-2020, 17:05 PM
Last Post: fabulos
YTMercedes W204 ALL KEYS LOST CGDI 12manux 6 871 20-06-2020, 18:56 PM
Last Post: 12manux
  FVDI Feedback / questions and answers klostazy 369 122,825 12-05-2020, 13:13 PM
Last Post: Kozik20l
XZBMW CGDI BMW Support & Feedback kimz 2 808 18-04-2020, 17:44 PM
Last Post: Ckh091020
0Immo VVDI PROG Support/Feedback Thread Czozen 245 81,010 13-04-2020, 17:36 PM
Last Post: Vojno
  Key Master/Key Master DP FEEDBACK mar.wo 30 10,374 17-02-2020, 19:10 PM
Last Post: geneluauto

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content