[Pedrom92]

Hello, I'm trying to retrofit LED fog lights on a BMW F20 I added 5A1 to VO and whenever I try to code the FEM I get an error, I can't code, if using Bimmercode works and I can code but with Esys not. About 2 weeks ago I was able to code this same FEM.
Someone can help me?
error is this.

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

Read SVT before TAL execution started.
Read SVT before TAL execution finished.

TAL execution started.
ExecutionID=2019/10/26-18:29:10.513
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[FEM_BODY - 40] prepareECUforCoding started [PROGRESS]
[FEM_BODY - 40] There was an error during TAL execution, please check the log files. [WARN]
[FEM_BODY - 40] - [Exception - UNKNOWN] Errors during NCD generation for CAF cafd_00000794-018_070_003: 
DataGroup ., Function .: More than one condition parameter is active: [., .]
[FEM_BODY - 40] finalizeECUCoding started [PROGRESS]
[FEM_BODY - 40] finalizeECUCoding error [PROGRESS]
[FEM_BODY - 40] There was an error during TAL execution, please check the log files. [WARN]
[FEM_BODY - 40] - [Exception - FEM_BODY - 40] job failed with negative response error: 
 code: exception in job
 description: MCD3_FinalizeECUCoding threw java.lang.NoSuchFieldError: WRITE_NCD_ERROR; LinkName: FEM_BODY_40_ETHERNET
 severity: FATAL ERROR

[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "5s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.
Abarbeitung beendet

[Waveshaper]

Did you try to just code VO with the orginal VO. Just to make sure coding works. Because your error message seems like you want to code parameters which doesn't work together with VO for example.

[Pedrom92]

Don’t try. In this car retrofit 431, 5A1, 609, 508, and 521.

[Almaretto]

"DataGroup ., Function .: More than one condition parameter is active: [., .]"

This means you have conflicting FA elements. For example, car cannot have both 522 Xenon and 552 LED.

Can you post entire SALAPA?