Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
oem icom next not reconized by iradartool
28-10-2022, 20:09 PM,
Post: #1
|
|||
|
|||
oem icom next not reconized by iradartool
Hi guys, i have an ip issue with a new oem icom
indeed the i-next is not reconized by itool radar. no IP ect.. event with ista D 4.32.15. i think i have to upgrade the firmware , but when i try ti connect it with microsoft edge : http://169.254.33.45:60080/ username/password: root/NZY1150263 i have nothing...but i can connect it as a k-dcan cable with Drgini21 p.s: using win11 thank you for your help |
|||
28-10-2022, 20:56 PM,
Post: #2
|
|||
|
|||
RE: oem icom next not reconized by iradartool
Check that no static ip is set in Windows.
Connect icom and perform reset. It will get 169 address again. Also connect icom directly to laptop. Once it works you can attach router if needed. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
28-10-2022, 21:12 PM,
Post: #3
|
|||
|
|||
RE: oem icom next not reconized by iradartool
You need to add your ICOM address to config file of iToolRadar or else it never will find it. That is POC tool. I don't use anymore and could never been happier.
|
|||
28-10-2022, 22:14 PM,
Post: #4
|
|||
|
|||
RE: oem icom next not reconized by iradartool
maybe try to factory reset
|
|||
31-10-2022, 17:20 PM,
Post: #5
|
|||
|
|||
RE: oem icom next not reconized by iradartool
If ICOM is not set to the IP address static addresses then connect ICOM to the DHCP router or DHCP software and find out what IP address it has received.
Then you log in to the administration. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content