Possibly Related Threads…

***srzar*** · 25-03-2023, 21:43 PM,

it´s possible make vr with pcmflash 1.20 clone?
if you have the original one... i try with no luck, dont know where put ori file for vr

***flashs*** · 27-03-2023, 08:58 AM,

(25-03-2023, 21:43 PM) srzar Wrote: it´s possible make vr with pcmflash 1.20 clone?
if you have the original one... i try with no luck, dont know where put ori file for vr

what ecu you read and write

***srzar*** · 28-03-2023, 17:16 PM,

(27-03-2023, 08:58 AM)flashs Wrote:
(25-03-2023, 21:43 PM) srzar Wrote: it´s possible make vr with pcmflash 1.20 clone?
if you have the original one... i try with no luck, dont know where put ori file for vr

what ecu you read and write

i try to make vr on edc17 but no sucess, not have the read option, maybe 1.20 not have vr? or i dont know where to put vr file......

***spawn2*** · 28-03-2023, 18:02 PM,

Hi.

VR only 1.21 and earlier.

***flashs*** · 29-03-2023, 08:14 AM,

(28-03-2023, 17:16 PM) srzar Wrote:
(27-03-2023, 08:58 AM)flashs Wrote:
(25-03-2023, 21:43 PM) srzar Wrote: it´s possible make vr with pcmflash 1.20 clone?
if you have the original one... i try with no luck, dont know where put ori file for vr

what ecu you read and write

i try to make vr on edc17 but no sucess, not have the read option, maybe 1.20 not have vr? or i dont know where to put vr file......

pcm flash clone vag edc17cp14,edc17c46 vr recording modul 50 obd vr ok
you have to find the file yourself,make an identification if i have a orig file i will give it to you

***iDIDNTdoIT*** · 02-04-2023, 00:31 AM,

(21-09-2022, 10:18 AM)paui Wrote: i have ori pcmflash with 71 and 77 and works perfect with sm2 pro clone from FVDI.

the other OBD protocols works also perfect and fast write. EDC17C64 etc.

I purchase the "green" version from them, and protocol 71 doesn't seem to work at all. won't even ID DME. MEDV17.2.4 and .G . I have given up on protocol 71. Fine with me, have better tools for those.
Managed to read password and flash from SIM2K-241, but didn't write, used another tool.
It did work well with a few subaru and ford pcm's i tried, i wrote with those and was ok.

***maniak321*** · (This post was last modified: 08-04-2023, 16:33 PM by maniak321.)

Hello,
i want to buy l Scanmatik 2 pro and clone PCMflash but i have a question.
If i have Scanmatik2 i don't need fetrotech for MG1 MD1 EDC16 MED9.1 ecu?

***victorysatgr*** · 10-04-2023, 06:46 AM,

pcmflash doesn't support bench MG1, MD1(yet???)

***foxportal*** · 01-05-2023, 09:13 AM,

PCMFlash 1.2.0 china (green)
Scanmatik ori
Kangoo
SID305

R/W -> ok

***rabie_m*** · 01-05-2023, 21:26 PM,

ANNY TESTED NISSAN SID309

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	ECM Titanium Original Older Version Software Backup	mzg	1	961	14-06-2024, 14:38 PM Last Post: krzy
	Ecu Bench Tool 2.1.5.6 (AMT BST Clone) what do you think ?	ROD-BENDERS	174	24,194	13-06-2024, 11:52 AM Last Post: erickarlborg
	Original Need Ford Transit 2.2 Visteon	mcmcmc	2	30	11-06-2024, 14:46 PM Last Post: mcmcmc
	4gb pcmflash vr files	moriaz	11	5,201	10-06-2024, 19:27 PM Last Post: zalimhan74
	MSE6.0 CF450 ATV ecu clone	ottway	1	32	04-06-2024, 18:02 PM Last Post: bogdanwmw
	Skoda EDC17CP14 clone	matuuu	2	79	04-06-2024, 04:24 AM Last Post: matuuu
	kess v2 clone - support write me7.1.1 ?	CenturionM	1	69	03-06-2024, 21:08 PM Last Post: CenturionM
	Searching for original file Skoda med9.1 1Z0907115D 0261S02478 387562	golf110	1	33	03-06-2024, 18:58 PM Last Post: bleXER
	med17.1 a4 2.0 TFsi clone	jyc32727	2	64	01-06-2024, 05:57 AM Last Post: DSESET86
	fiat panda mjd6f3.A5 HW04R need original file	Dash_Burner	3	82	29-05-2024, 07:01 AM Last Post: bleXER

Contact Us