Possibly Related Threads…

***srzar*** · 25-03-2023, 21:43 PM,

it´s possible make vr with pcmflash 1.20 clone?
if you have the original one... i try with no luck, dont know where put ori file for vr

***flashs*** · 27-03-2023, 08:58 AM,

(25-03-2023, 21:43 PM) srzar Wrote: it´s possible make vr with pcmflash 1.20 clone?
if you have the original one... i try with no luck, dont know where put ori file for vr

what ecu you read and write

***srzar*** · 28-03-2023, 17:16 PM,

(27-03-2023, 08:58 AM)flashs Wrote:
(25-03-2023, 21:43 PM) srzar Wrote: it´s possible make vr with pcmflash 1.20 clone?
if you have the original one... i try with no luck, dont know where put ori file for vr

what ecu you read and write

i try to make vr on edc17 but no sucess, not have the read option, maybe 1.20 not have vr? or i dont know where to put vr file......

***spawn2*** · 28-03-2023, 18:02 PM,

Hi.

VR only 1.21 and earlier.

***flashs*** · 29-03-2023, 08:14 AM,

(28-03-2023, 17:16 PM) srzar Wrote:
(27-03-2023, 08:58 AM)flashs Wrote:
(25-03-2023, 21:43 PM) srzar Wrote: it´s possible make vr with pcmflash 1.20 clone?
if you have the original one... i try with no luck, dont know where put ori file for vr

what ecu you read and write

i try to make vr on edc17 but no sucess, not have the read option, maybe 1.20 not have vr? or i dont know where to put vr file......

pcm flash clone vag edc17cp14,edc17c46 vr recording modul 50 obd vr ok
you have to find the file yourself,make an identification if i have a orig file i will give it to you

***iDIDNTdoIT*** · 02-04-2023, 00:31 AM,

(21-09-2022, 10:18 AM)paui Wrote: i have ori pcmflash with 71 and 77 and works perfect with sm2 pro clone from FVDI.

the other OBD protocols works also perfect and fast write. EDC17C64 etc.

I purchase the "green" version from them, and protocol 71 doesn't seem to work at all. won't even ID DME. MEDV17.2.4 and .G . I have given up on protocol 71. Fine with me, have better tools for those.
Managed to read password and flash from SIM2K-241, but didn't write, used another tool.
It did work well with a few subaru and ford pcm's i tried, i wrote with those and was ok.

***maniak321*** · (This post was last modified: 08-04-2023, 16:33 PM by maniak321.)

Hello,
i want to buy l Scanmatik 2 pro and clone PCMflash but i have a question.
If i have Scanmatik2 i don't need fetrotech for MG1 MD1 EDC16 MED9.1 ecu?

***victorysatgr*** · 10-04-2023, 06:46 AM,

pcmflash doesn't support bench MG1, MD1(yet???)

***foxportal*** · 01-05-2023, 09:13 AM,

PCMFlash 1.2.0 china (green)
Scanmatik ori
Kangoo
SID305

R/W -> ok

***rabie_m*** · 01-05-2023, 21:26 PM,

ANNY TESTED NISSAN SID309

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	PCMFLASH SUBSTITUTE for USING OVER the NET	jim jones	2	70	23 minutes ago Last Post: jim jones
	Solved ✔ Audi A4 B8 2008 edc17cp14 clone	34ko	8	245	7 hours ago Last Post: 34ko
	W211 Original file needed	Liveros	1	43	Yesterday, 06:23 AM Last Post: Liveros
	Ecu Bench Tool 2.1.5.6 (AMT BST Clone) what do you think ?	ROD-BENDERS	137	19,750	Yesterday, 05:11 AM Last Post: mkii
	need original file w176	loki954	2	66	22-04-2024, 16:07 PM Last Post: loki954
	PCMflash Pinout for all modules	aimidin	0	122	20-04-2024, 09:18 AM Last Post: aimidin
	NEED ORIGINAL FILE NISSAN CABSTAR	tigre	0	34	18-04-2024, 10:03 AM Last Post: tigre
	searching original files MJET9DF F073F905_52143170	carmageddon1970	1	57	17-04-2024, 12:23 PM Last Post: carmageddon1970
	BMW 330i 231 HP MS 43 original file	carmageddon1970	3	110	17-04-2024, 11:21 AM Last Post: carmageddon1970
	Who can rework ORIGINAL KESS V2	pluto2013	7	1,880	15-04-2024, 17:43 PM Last Post: mdanilo

Contact Us