Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
New VAS 6154A Grey Clone - Experience
29-01-2024, 19:15 PM,
(This post was last modified: 31-01-2024, 17:04 PM by rehatflogs.)
Post: #1
|
|||
|
|||
New VAS 6154A Grey Clone - Experience
Has anyone tried and tested the new VAS 6154A DOIP clone from AliExpress?
Uses original drivers and no driver manager, and has wireless adaptor FW seems to be updatable too Seems to be the next must have device after the VNCI red interface. Be good to get some feedback from real users |
|||
29-01-2024, 20:11 PM,
Post: #2
|
|||
|
|||
RE: New VAS 6154A Clone - Experience
I used one. It is a real good clone. I tested it on Audi A7 2023 and works great. I configured it for piwis also. I had vnci and 6154a clone. Vnci is slow, 6154a worked faster.
|
|||
29-01-2024, 21:28 PM,
Post: #3
|
|||
|
|||
RE: New VAS 6154A Clone - Experience
Hello.
how to configure Piwis 3? (29-01-2024, 20:11 PM)majekpl Wrote: I used one. It is a real good clone. I tested it on Audi A7 2023 and works great. I configured it for piwis also. I had vnci and 6154a clone. Vnci is slow, 6154a worked faster. |
|||
29-01-2024, 23:05 PM,
Post: #4
|
|||
|
|||
RE: New VAS 6154A Clone - Experience
(29-01-2024, 20:11 PM)majekpl Wrote: I used one. It is a real good clone. I tested it on Audi A7 2023 and works great. I configured it for piwis also. I had vnci and 6154a clone. Vnci is slow, 6154a worked faster. Of course, I also have this new clone and it works very well, by the way, I don't know how to use it with piwiss.... Should I install a special version? I have a virtual machine that in theory is for Vas6154 clone, although it doesn't recognize this one. new clone....thanks |
|||
30-01-2024, 13:50 PM,
Post: #5
|
|||
|
|||
RE: New VAS 6154A Clone - Experience
(29-01-2024, 21:28 PM)hartar197 Wrote: Hello.I have vnci and its also good and fast i in old ecu its slow all vci bat in new cars its fast i have in my laptop i7 fast and its very fast olso in diagnosis!! |
|||
30-01-2024, 14:38 PM,
(This post was last modified: 30-01-2024, 14:38 PM by cicoe.)
Post: #6
|
|||
|
|||
RE: New VAS 6154A Clone - Experience
(29-01-2024, 21:28 PM)hartar197 Wrote: Hello. Use this Virtual Machine https://cartechnology.co.uk/showthread.php?tid=86781 install dedicated 6154 driver (grab it from Odis S or E) and then use .bat dedicated to original 6154. |
|||
Reputation: +1 - hartar197 [+1] | |||
30-01-2024, 14:52 PM,
Post: #7
|
|||
|
|||
RE: New VAS 6154A Clone - Experience
Do you have a link for this new clone?
|
|||
30-01-2024, 16:04 PM,
Post: #8
|
|||
|
|||
RE: New VAS 6154A Clone - Experience
Hi.
I have both interfaces,i think that the VNCI is better with online connections. The grey interface disconect often with online. With usual diagnosis i don't see differences. |
|||
30-01-2024, 17:15 PM,
Post: #9
|
|||
|
|||
RE: New VAS 6154A Clone - Experience
The case was poorly made, and the ⚪ button collapsed after a few uses
|
|||
31-01-2024, 08:51 AM,
Post: #10
|
|||
|
|||
RE: New VAS 6154A Clone - Experience
have both grey and red... Can say the grey one works more stable for me than the red one. Never got a single issue. Use it mostly over Wifi. Did many SVMs and CPs. Already read more than 50 cars since I have it.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content