[Mattyemme]

1738700468[/url]']

1738673934[/url]']

1738668117[/url]']

1738654103[/url]']
Ok i try to do this…i add 920 and 9xa to my FA….calculate and the software and BTLD is different….is right?….after when i want to flash egs i flag SW/CD right??….i enclosed a photo

Not really, you have to flash one SWFL, see screenshot.

ok but I can't get that type of SWFL...47DA which should be the Alpine one...I tried with the one suggested but I only have the one you see in the photo...do I have to edit it manually and insert it inside?

I have this picture with the provided data. Check yours. You can flash back and forth and check the result using the D1 indicator on the cluster.

hello good evening everyone….I tried to update the software as written in the post but the update ends in error…it doesn't complete the operation….

[bїшшёяisti]

Here is a list of working calculations.

Some are taken out from models archive for BMW models. But most are tested. Will update when tested. 

UPDATED 15-06-2019

       F01: XB71 - 1211 - SWFL_1367_XXX
F06: XB71 - 1211 - SWFL_1367_XXX
F06: 5D71 - 0713 (LCI)
F07: XB71 - 1211 - SWFL_1367_XXX
F07: 5D71 - 0713 (LCI)
F10: XA71 - 1211 - SWFL_1367_XXX
F11: XB71 - 1211 - SWFL_1367_XXX
F10: 5D51 - 0713 (LCI)
F11: 5D71 - 0713 (LCI)
F25: WY71 - 0316 - SWFL_210C_XXX
F30: 3E51 - 0313 - SWFL_210B_XXX
F30: 8L12 - XXXX - SWFL_XXXX_XXX (LCI)
F31: 3L51 - 0313 - SWFL_210B_XXX
F31: 8L12 - XXXX - SWFL_XXXX_XXX (LCI)
F32: 3R51 - 0714 - SWFL_1EE4_XXX
F33: 3E51 - 0714 - SWFL_1EE4_XXX
F34: 3E51 - 0313 - SWFL_210B_XXX
F36: 3E51 - 0714 - SWFL_1EE4_XXX

Hi,
What Typeschlussel should i use for X4, F26 ?
Should i use F25 ?
Thanks.

...................change my mind, there is better, XHP

[BMW_E_F_G]

Hi guys,

I am trying to do a FP Calculation but get an error "No FP could be generated from FA....."

BMW 730d F01 2010.

Can someone help me out with this. I want to flash the alpina trans to my car because the previous owner did a remap without trans flash.

I have done this to my 550i without any problems.

XB71 - 0312/1211 both not working

920 + 9XA

Thank you in advance!

[redog4dy]

Hello guys, i have F01, 2011-09, cant get swfl right to flash egs alpina, it seems has 8hp70z.
Any tips to get right swfl?

Thanks,

[vld]

Hello guys, i have F01, 2011-09, cant get swfl right to flash egs alpina, it seems has 8hp70z.
Any tips to get right swfl?

Thanks,

What is exactly a model is a car?
only 740xd has 8HP70, for it you can try the configuration for f10 before LCI.

XA71 - 1211 - SWFL_1367_XXX

[redog4dy]

Hello guys, i have F01, 2011-09, cant get swfl right to flash egs alpina, it seems has 8hp70z.
Any tips to get right swfl?

Thanks,

What is exactly a model is a car?
only 740xd has 8HP70, for it you can try the configuration for f10 before LCI.

XA71 - 1211 - SWFL_1367_XXX

this is F01 740xd, AWD, N57

if i calculate for f10, what you suggest, i will have soll swfl 1367, so  can i go with this modified fa for f10? 
Thanks,

[kenza750]

hello, i`ve read entire 60 pages, but im not sure what typecode to use on G31 530d LCI RWD 2022. actual typecode is 11AJ.
I have an automatic transmission without paddles under the steering wheel.
Is there a kind soul who can advise me on how to do this?

Did you already manage to put Alpina SW in the G31 530d LCI? I also have a G31 530d LCI (11AJ) and want to load Alpina SW in it. As far as I can see in realoem.com, the type code should be 71CB.

[DENTFLEX]

ALPNA FLASH

G30 Alpina B5 is based on the 40ix platform of the G3x. That's why you need to use the type code below.

Reprogram the EGS, EPS, DSC, VDP via TAL Processing
Parameters that need to be manipulated;
EGS - SWFL_000047DA
EPS - SWFK_00009467
VDP - SWFK 00002E97/99

Typschlüssel/Chassis code:
G30 — 530d xDrive ECE LL (JD11)
G31 — 530d xDrive ECE LL (JN51)
Zeitkriterium/Manafacture date: 0317

Add 920 + 9XA to the SALAPA-ELEMENT (FA/VO)

[kenza750]

Hi,

I was planning to flash Alpina SW into my 530d G31 LCI (RWD). 
Actual typecode: 11AJ
Changed typecode of the 530d G31 LCI xDrive (31AJ). TC: left the same (0721).

My car has an EGS7 module, but after calculating TAL, There appears an EGS next to the EGS7 module. Something is not right. Anybody knows what I am missing?

see screenshot of SVT. 

What am I doing wrong?
Or should I use the typecode of the BMW ALPINA D5s (71CB; TC0621 or 1021 for example which are both menitioned in realoem)?

used latest Р5dZDата: 4.56.32 by the way

[user_530d]

Edit typecode to JN51 and add VO option 9XA