[Jalami]

I'm getting FRM errors 00A3B4/00A3C1 in i5тд. I'm trying to read the Dflash but I can't; it seems to be corrupted. I'm using xprog 6.1.2. I can read pflash and EEPROM. Any suggestions or help?
FRM in red, no communication.S0114


   
   

[cursor]

Normally working FRM III didn't use Dflash. Only EEPROM.
If you can connect to FRM with i5тд, try to update with WinKFP.
Also You can use eeprom from another FRM III E89 E9x LED XE, and next use i5тд P to determine correct ZUSB

[Jalami]

Normally working FRM III didn't use Dflash. Only EEPROM.
If you can connect to FRM with i5тд, try to update with WinKFP.
Also You can use eeprom from another FRM III E89 E9x LED XE, and next use i5тд P to determine correct ZUSB

There is no communication with FRM, ECU is in red on i5тд.

---

I have a Dflash reading from this same car from a few months ago; I don't know if rewriting the epprom would be enough.??

Solved,: rewrite the eeprom from a previous read that had DFLASH from this same car.

[sixcode]

0x0 means there is no Dflash and there is nothing corrupt so in case of dead via diag buy other one