[Kri]

nope, i only have ODB/INPA interface, and can connect via ethernet as my CIC has an ETH Port.

[kuno24]

How can i cancel maps lifetime FSC (upgrade index 0xff) made before and inject new based on new 1b FSC? At this time CIC is script (vers 1) aktivated.

[duckdonald]

if you changed FSC set, .. the old life time code has no more value.

in any case it is enough to rewrite FSC 0x28 with single update code.

[kuno24]

CIC itself asks for new map code? As i before said, i had liftime code entered.

[duckdonald]

if the cic has script, it does not allow a map update, it must first be activated, check FSC status.

To delete the life time code, delete the 0x28 FSC, and when you update the map you will be asked to enter the new code. (with script, activate FSC or Emulator)

[kuno24]

................

[robot1]

Can anyone upload this again please?

[intel123]

link in opening post updated.

[artek_was]

Thanx for all. I find way to import FSC to my CIC. Regards

[kuno24]

Stuck on Fstool error after job: CheckFsc (11028). Good thing, that made before backups from system files. Replaced Carserver files from Dr Gini server, but nothing. CIC made from backup alive again. Is it 90 %, that you are unsuccesseful, because FSTool is not so good program. Also removing previosly installed script is not so easy, because directory mnt/EFS_RO is read only.  If you only know, how execute programs, pls do not try it!
So make backups.  How remove previous installed scripts and make backups: https://www.drive2.com/l/473687202505687590/

Deactivate and delete all active scripts in CiC. This can be done via FTP / Telnet. First of all, in the startup file startl6sss.sh, which is in (mnt / EFS_RO) , we delete the script start lines, like: (magic.sh, activate_cic.sh, enablefsc.sh, activate_swt .sh) Also remove the magic.sh, activate_cic.sh, enablefsc.sh activate_swt.sh scripts from the hard disk in (/ mnt / hbuser) > And (mnt / HBpersistence).

It is advisable to make backup copies of files:

mnt / HBpersistence / fcert.swt
mnt / HBpersistence / rcert.swt
mnt / HBpersistence / scert.swt
mnt / HBpersistence / normal / generalPersistencyData_DiagnosticSWTController
/ mnt / hbdebug / data01
/ mnt / hbdebug / data02
/ mnt / hbdebug / data03

And copy the top of the files on the CiC hard drive from the virgin archive:

mnt / HBpersistence / normal / generalPersistencyData_DiagnosticSWTController
mnt / hbdebug / data01
mnt / hbdebug / data02
mnt / hbdebug / data03

Edit. All is ok.