[cedchung]

Is it possible to retrofit adaptive LED headlights without KAFAS?
Thanks

[ironist]

1.E-SYS MODULE DETECT-CAF DO IT

2. V.O. 코딩 552 AND BODY CODE DO IT

3. ISTA + LIGHT LEARNING DO IT

[buzzy]

Hello, maybe someone can help me.. Installed 5A2 led headlights on pre-LCi f30,everything works good, but fog lights disappeared. Status in Instrument cluster is present. When code back to halo (delete 5A2), fog lights are working. Compared ncd, all parameters concerning NSW changed, but still no luck..

[kubixix]

Hello, maybe someone can help me.. Installed 5A2 led headlights on pre-LCi f30,everything works good, but fog lights disappeared. Status in Instrument cluster is present. When code back to halo (delete 5A2), fog lights are working. Compared ncd, all parameters concerning NSW changed, but still no luck..

Did you change zeitkriterium?

[deneyer]

I have a problem with adaptieve led retrofit, i have an F34 with adaptive bi-xenon from 2014.

Did the wiring according to newtis info, changed date to 1116, deleted 522 and 524 and added 552 and then vo coded FEM, REM, FLE43 and FLE44.

Now the problem, low beam, high beam, direction indicators and vertical aim are working. What is not working is the DRL and adaptive function.

On my cluster i get drl defect and if i read out with ista it says open circuit, no error for AHL. 

Annuone had this problem or know what the problem is and how to fix it?

[Denisca]

Hi to everyone. I had retrofited today f32 from 2014.03 to adaptive led LCI. Headlights from itself works perfect, car was updated to last i-step. At first fem was coded with 2017.03 zeit, got some errors on szl, klima, a/c. Was decided to code with zeit older. Begam with 1116, then 03.16... until original zeit. Headlight still works perfect but one error is still in fem, error associated with air condition...” air conditioning compressor: control valve, short circuit to positive or wire break” some ideas, advices ? Thanks

[Denisca]

I have a problem with adaptieve led retrofit, i have an F34 with adaptive bi-xenon from 2014.

Did the wiring according to newtis info, changed date to 1116, deleted 522 and 524 and added 552 and then vo coded FEM, REM, FLE43 and FLE44.

Now the problem, low beam, high beam, direction indicators and vertical aim are working. What is not working is the DRL and adaptive function.

On my cluster i get drl defect and if i read out with ista it says open circuit, no error for AHL. 

Annuone had this problem or know what the problem is and how to fix it?

Hi. In your case i guess problem is in old cars i-level, need update to actual.