Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Digital cruise control display not always working
24-09-2018, 11:52 AM,
Post: #1
|
|||
|
|||
Digital cruise control display not always working
I often came to this problem, if you do a cruise control retrofit on some cars, with low cluster/kombi, and do the 540/544 coding, it should activate TEMPOMAT_SETZ_ANZ_DAUER wert_02 (and a few other values). But often it doesn´t work. For example:
A X1 E84 with no cruise control gets a new SZL with 544 (Dynamic Cruise Control), but still has the low kombi, everything works fine, except the display, if the cruise control gets activated. Sometimes I could get it working after updating it with WinKFP, and sometimes I also rewrote the EEPROM with a dump that has the cruise control display, which worked, but that´s takes too much time.. Is there another method, except switching to a high kombi? |
|||
25-09-2018, 07:00 AM,
Post: #2
|
|||
|
|||
RE: Digital cruise control display not always working
I have same problem, but not found solution....
|
|||
25-09-2018, 10:35 AM,
Post: #3
|
|||
|
|||
RE: Digital cruise control display not always working
Too bad, I don´t know what´s the issue behind that? I would understand if the kombi is from 2004 or 2005 and you just can´t code it. But in my case it was one from 2015. Or is it because of different manufactures, like VDO and Siemens?
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
G01 - lost communication with DSC but it's working | Krysiaman | 3 | 82 |
29-04-2024, 14:31 PM Last Post: Krysiaman |
|
E60 M5 KOMBI cruise control | bmwfnatic | 4 | 186 |
29-04-2024, 09:51 AM Last Post: bmwfnatic |
|
BMW MG1CS003 working hours reset | ArthurMichael | 0 | 99 |
26-04-2024, 17:48 PM Last Post: ArthurMichael |
|
BMW N13 MEVD17.2.5 working hours reset | Adel75 | 2 | 103 |
26-04-2024, 11:48 AM Last Post: Adel75 |
|
Reset Working Hours MEVD17.2.6 E70 | EngineerX | 17 | 1,267 |
18-04-2024, 17:05 PM Last Post: SkeYT |
|
Add gear display in D-Mode ZF 8HP | TIGHTFIN | 2 | 470 |
18-04-2024, 12:11 PM Last Post: viki300 |
|
e90 central locking not working | ELMEPRO | 10 | 378 |
15-04-2024, 12:33 PM Last Post: ELMEPRO |
|
Add gear display in D-Mode ZF 8HP | TIGHTFIN | 1 | 209 |
13-04-2024, 09:49 AM Last Post: user_530d |
|
BMW E84 Cruise control retrofit not workig | Alyn546 | 4 | 228 |
12-04-2024, 14:23 PM Last Post: DieStream |
|
E61 climate control does not work | claw | 7 | 280 |
11-04-2024, 19:25 PM Last Post: claw |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content