Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW X5 E70 4.8 Cant Start Ingnition Monitoring Error
21-06-2019, 08:25 AM,
(This post was last modified: 28-07-2019, 06:26 AM by obdcloud.)
Post: #1
|
|||
|
|||
BMW X5 E70 4.8 Cant Start Ingnition Monitoring Error
Hi all maybe someone have idea and can help me..
i try now Long time to start this Car some months is a X5 E70 4.8 2008 What Happens?? -Engine start normaly like all day and works for 10-20 secound and go off since this time i try all to start again but unlucky What i try: - Change Cranckshaft Sensor - Change Camshaft Sensor -Test CAS -Add New Key -Try whit Other DME,CAS and Key from same car -Test Ingnition Coils -Change Ignition Harness THE CAR ARE ALL TIME WHITOUT ANY ERROR first after try start whit other ECU,CAS and Key get ERROR DME Ignition and Ignition 2, Monitoring: combustion Duration !! This error is now same whit OLD ECU,CAS and Keys !! Fuel is 100% Here Presure from Fuel 100% OK Injectors are actuated too i have no more idea this car made me crazy hope someone have any idea, just what i see someone Play anything before whit VVS Valvetronic but think anyway Need start same if VVS not works P.S. off corse i made all time Sync DME-CAS THANKS for any Idea |
|||
21-06-2019, 11:33 AM,
Post: #2
|
|||
|
|||
RE: BMW X5 E70 4.8 Cant Start Ingnition Monitoring Error
What does ista suggest in the test plan?
|
|||
21-06-2019, 12:09 PM,
Post: #3
|
|||
|
|||
RE: BMW X5 E70 4.8 Cant Start Ingnition Monitoring Error
|
|||
21-06-2019, 18:37 PM,
(This post was last modified: 21-06-2019, 18:40 PM by Twoone.)
Post: #4
|
|||
|
|||
RE: BMW X5 E70 4.8 Cant Start Ingnition Monitoring Error
IF ISTA give no faults maybe there are no electronic faults.
Did you do compression test for each cilinder? Did you hear strange noise after the 20 seconds the engine was running? I had one at our garage with chain problem and al the inlet valves where damaged, no start ,no compresion and no fault in ECU memory |
|||
21-06-2019, 19:38 PM,
Post: #5
|
|||
|
|||
RE: BMW X5 E70 4.8 Cant Start Ingnition Monitoring Error
(21-06-2019, 08:25 AM)obdcloud Wrote: Hi all maybe someone have idea and can help me.. program the DME with the latest version of the program , one injector may be defective |
|||
21-06-2019, 20:58 PM,
(This post was last modified: 21-06-2019, 21:04 PM by obdcloud.)
Post: #6
|
|||
|
|||
RE: BMW X5 E70 4.8 Cant Start Ingnition Monitoring Error
(21-06-2019, 19:38 PM)Alex_Tushino Wrote:(21-06-2019, 08:25 AM)obdcloud Wrote: Hi all maybe someone have idea and can help me.. ok i will try thx (21-06-2019, 18:37 PM)Twoone Wrote: IF ISTA give no faults maybe there are no electronic faults. i do but not for last left or right no place here is no Sound aftter car go off same whean i try start sounds for me normal maybe like on one place (cylinder turn Little faster) not sure some guys say NO Sound pefect but same i ask me if chain is really posible on both side same time?? think happens one of one Million time .. but maybe is exactly that i will check VVS first becouse see someone Play anything before whit VVS but like i say same if VVS of he Need start and made spark like i know |
|||
06-07-2019, 05:18 AM,
Post: #7
|
|||
|
|||
RE: BMW X5 E70 4.8 Cant Start Ingnition Monitoring Error
PM the VIN Number or good if u let me check it with teamviwer
|
|||
24-07-2019, 14:34 PM,
Post: #8
|
|||
|
|||
RE: BMW X5 E70 4.8 Cant Start Ingnition Monitoring Error
|
|||
25-07-2019, 06:48 AM,
Post: #9
|
|||
|
|||
RE: BMW X5 E70 4.8 Cant Start Ingnition Monitoring Error
Replace injectors and sparkplugs if it is a petrol. Check that you have good compression in all cylinders. The fact that there is no error suggests that all electronics are working ok and injection is ok but the combustion is not happening as expected either because of a bad mix or a mechanical issue within several cylinders.
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Mini F55 EPS 4822F7 error | Alyn546 | 18 | 183 |
Yesterday, 21:10 PM Last Post: Alyn546 |
|
E39 other DME not start | bushido1992 | 4 | 91 |
13-05-2024, 20:24 PM Last Post: sys9291 |
|
BMW E83 A1 error - MRS: No message from DSC ... | ivanp | 39 | 1,617 |
13-05-2024, 15:45 PM Last Post: ivanp |
|
BMW EOS tester (IMIB) call-up error | fatfash | 7 | 332 |
11-05-2024, 18:13 PM Last Post: fatfash |
|
Error SIG_CHECK_FAILURE | Jalami | 16 | 2,020 |
10-05-2024, 07:39 AM Last Post: grizzle |
|
ISTA 4.47 test plan and error delete not available | bmwm3power | 7 | 534 |
04-05-2024, 15:49 PM Last Post: bmwm3power |
|
xdrive off with esys without error in dash | dankocg | 15 | 3,273 |
04-05-2024, 11:55 AM Last Post: kami2k |
|
G21 ID8 navi don't start | qbek90 | 7 | 212 |
02-05-2024, 14:09 PM Last Post: qbek90 |
|
Esys error message only on EPS. ''Failed to get CAFs for SWE'' | arthur101 | 2 | 162 |
25-04-2024, 22:48 PM Last Post: arthur101 |
|
NBT Evo CAFD missing after coding error | Mugga | 13 | 716 |
24-04-2024, 22:47 PM Last Post: Mugga |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content