Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Bmw e53 3.0d (2003) ECU update probleme need help
04-06-2022, 17:28 PM,
Post: #1
|
|||
|
|||
Bmw e53 3.0d (2003) ECU update probleme need help
The problem then followed, the
car then a 2003 BMW E53 3.0D , the original plan was to upgrade the DME but winkfp failed to load even when it was thrown for the first time errori: Error 211: Error on flash programming! Code 2021 datatransmission to ECU disrupted IFH-0010 datatransmission to ECU disrupted 12DDE40 2021 datatransmission to ECU disrupted SG_PROGRAMMIEREN 2021 datatransmission to ECU disrupted and another Error 211: Error on flash programming! Code 2020 no response from ECU ..... etc After that, the car will not start, says "fuel injection system" (does not take the feed pump), "trans. file safe prog '' (box in emergency mode), temp immediately below when the ignition is switched on and the ASC light illuminates with ABS. The above error did not exist before .... The engine cannot be accessed with INPA (SYS-0012 IDENTIFICATION ERROR), but the box, IKE, KMBI, etc. can be accessed. The error code in these modules is "Error CAN-bus timeout DME" (ie the modules cannot connect to the brain) Tool32 and WinKfp get some access, for example the UIF can be read, and so In the case of a normal K + DCAN cable with pins 7 and 8 twisted together, I also tried to disconnect the same result. İ have icom but i can't connect icom to inpa,ista or winkfp not car related problem i think ebidas ini problem. İ attached photo; coding data and zbs before flashing, flash error photo, ECU photo, inpa ECU information before flash error is anyone exposed to similar problems? |
|||
04-06-2022, 18:56 PM,
Post: #2
|
||||||||||
|
||||||||||
RE: Bmw e53 3.0d (2003) ECU update probleme need help
(04-06-2022, 17:28 PM)hero3838 Wrote: The problem then followed, theGot a dump here and program flash memory -
|