Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ How to pair used BMW EDC17CP45 ecu, old one not accesable.
26-09-2022, 13:13 PM,
Post: #1
|
|||
|
|||
How to pair used BMW EDC17CP45 ecu, old one not accesable.
Hello everyone!
I bought a used ecu for an BMW 3 F Serie. Old ecu is destroyed, so i can not get any data from it. How can i pair the new ecu to the car? I have VVDI2, Autel IM608, Autotuner, Flex, etc... Greetings Patrick. |
|||
26-09-2022, 13:15 PM,
Post: #2
|
|||
|
|||
RE: How to marry used BMW ecu to car EDC17CP45, old ecu not accesable.
Isn from donor ecu to cas and some coding
regards Always new stuff to learn
Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
Reputation: +3 - dabaca [+1] , loki954 [+1] , ROD-BENDERS [+1] | |||
26-09-2022, 13:52 PM,
Post: #3
|
|||
|
|||
RE: How to marry used BMW ecu to car EDC17CP45, old ecu not accesable.
(26-09-2022, 13:15 PM)raffy haddad Wrote: Isn from donor ecu to cas and some coding unfortunately nope if it is AT. Then have to reset the transmission isn....it will be stuck on P. have to give more info about the car and the ecu No help for people not give a feedback
|
|||
Reputation: +3 - dabaca [+1] , raffy haddad [+1] , ROD-BENDERS [+1] | |||
26-09-2022, 14:08 PM,
Post: #4
|
|||
|
|||
RE: How to pair used BMW EDC17CP45 ecu, old one not accesable.
Yes it is an Automatic..
So what then? |
|||
26-09-2022, 14:10 PM,
Post: #5
|
|||
|
|||
RE: How to pair used BMW EDC17CP45 ecu, old one not accesable.
(26-09-2022, 14:08 PM)pveeningen Wrote: Yes it is an Automatic.. do we need to pull every word out of you ? give all the info, we don't have crystal ball No help for people not give a feedback
|
|||
Reputation: +2 - raffy haddad [+1] , ROD-BENDERS [+1] | |||
27-09-2022, 22:41 PM,
Post: #6
|
|||
|
|||
RE: How to pair used BMW EDC17CP45 ecu, old one not accesable.
auto hex should be able to change isn in your dme,
|
|||
Reputation: +1 - raffy haddad [+1] | |||
28-09-2022, 11:07 AM,
Post: #7
|
|||
|
|||
RE: How to pair used BMW EDC17CP45 ecu, old one not accesable.
Read fem and write isn in ecu
|
|||
Reputation: +2 - raffy haddad [+1] , pveeningen [+1] | |||
03-10-2022, 01:36 AM,
Post: #8
|
|||
|
|||
RE: How to pair used BMW EDC17CP45 ecu, old one not accesable.
For everyone who is interested! I have solved it.
I have pulled the FEM from the car, and read out the ISN with Autel IM608. After that, i putted the ISN in the DME, and wrote the VIN number from the car in the Eeprom by hand. After that, the car started immediately! Then i did FULL automatic coding with IM608, and all the DTC's where gone! |
|||
Reputation: +1 - raffy haddad [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content