Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Crank but no start
04-11-2023, 16:21 PM,
Post: #1
|
|||
|
|||
Crank but no start
hello i got a BMW E90 330XI N52 that wont start.. had problem first with water pump, parked car and dont turn on anymore,
the ECU DME had realy burnd pinns and contacts from water. i cleaned the contacts from the wires. bought a used MSV70 DME and CLONED the modul with KESS 3. i connected and still only crank.. though maybe something with immo/EWS so i patched it and still same dont start.. i checked everything VVT,AIRMAS, FUSES,RELAYS,Eaven cloned new CAS thought maybe problem there.. i got a error in CAS that i can´t delete A0B4 (Engine start, starter oeration)this error is refer to a starter when bad and dont crank.. but in this case it cranks so its not that problem .. and a second error that comes sometimes in the DME 2F47 (Irreversible EWS fault) so i get this error with original flash and also with EWS delete so i dont understand.. please can somebody check the both files DME and CAS and se if there is missmatch and wrong due to sync.. BR |